Results 1 to 2 of 2

Hybrid View

  1. #1
    ROG Member Array
    Join Date
    Jan 2019

    EVO 970 NVME Help - Maximus XI Hero WiFi

    Hi all,

    I am brand new to this whole building a computer thing and may have gotten a little over my comfort zone. I successfully built my first PC from the ground up and I was excited to use an M.2 NVME drive for my OS. Currently, I have Windows 10 loaded onto the M.2 and for whatever reason I am experiencing the following struggles:

    VERY slow boot times... I am talking like between 40 seconds to 2 minutes which I know is horribly slow for an M.2 drive. My old computer had a SSD and it booted within seconds. I first installed the M.2 into the slot near the CPU M.2_1 then I talked to a rep at ASUS and they said to move it to the M.2_2 (i didnt have a screw for it to hold place so I just threw the heat sink shield on and screwed it in) so I did. I then changed SATA mode selection from Intel RST to AHCI. I then changed the M.2_1 config to PCIE . Windows shows the drive but has the Microsoft Drivers - Not sure how to get the best performance from my m.2.

    Which slot should it be in? M.2_1 or M.2_2?

    What do I do in BIOS to run as fast as possible for great boot times?

    Windows says the newest driver for the M.2 is installed (Microsoft version) so how do I get the Samsung one installed?

    I bought Windows 10 but I saw online it might have to be a bootable UEFI version?

    Thank you in advance for this as I am a complete newbie to this and I couldn't really find a solution online.
    Last edited by Polecats03; 01-17-2019 at 07:28 PM.

  2. #2
    ROG Member Array ceevee369 PC Specs
    ceevee369 PC Specs
    MotherboardMaximus HERO XI
    ProcessorIntel i7 9700K
    Memory (part number)Corsair Dominator Pro 16Gb RGB
    Graphics Card #1ASUS STRIX RTX 2080 Ti OC
    MonitorLG 4K
    Storage #1Samsung NVME 970 pro
    Storage #22 x Samsung SSD EVO 850 Pro 1Gb
    CPU CoolerCorsair VAO 115 RGB
    Power SupplyCorsair RM 650X
    Keyboard Corsair RGB K70
    Mouse Corsair
    Mouse Pad Steelseries
    Headset/Speakers Altec Lansing
    OS Win 10.2

    Join Date
    Feb 2019

    Sad you didn’t got a reply. I as well installed a cloned evo NMVE but bios settings are unclear to me how the SSD can be bootable. I connected my previous SSD via SATA 1, and that works fine. The seller told me that M.2_1 is for 2280 model SSD but whatever I change in the bios, no boot on the NVME. And yeah...boot time is slow. I am sure it’s a bios setting, but can’t find the answer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts