Modded bios Rampage VI

[bogsha]

Attachment 88015

@Bogsha Look like your L1 L2 cache bandwidth a bit too low. What happen ?

Then i have a wonderful task for you here, if you find out i'll tell you why. Deal ?

[brogadget]

Am following this thread for sometime, and wanted to throw in my 2cents, system running rock stable:



What surprises me, is "low" memory write speed. Someone has a clue or help?

Mainboard: APEX VI + G Skill RipjawsV F4-3600C16-8GVK @1.4V

As well, usually RTL and IOL values are same (A1-B1-C1-D1....A2-B2-C2-D2,....), but in this case RTL (A1) is 57 instead of 59 and IOL (A1) is 6 instead of 8. When I try to setup the values manually in BIOS, system will not post anymore, it is odd, I have to leave RTL+IOL values on auto.

I am hoping as well for a modded 3301 ApexVI bios with new modules and microcode and maybe rebar.

[Cherry[PL]]

Am following this thread for sometime, and wanted to throw in my 2cents, system running rock stable:



What surprises me, is "low" memory write speed. Someone has a clue or help?

Increase your cache. I didn't play with it much, but 3GHz boosted my write speed from 80 to around 100.

[TSportM]

Latest Modules
Latest Microcode 3101
Based on 0701 (from shamino)

Save your Profile before, needs to be flash via bios flashback (Note, CMOS Clear before)

Modules
EFI Intel RST for SATA - 18.31.1.5224
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 6.2.0.1034
OROM VBIOS SKL-KBL - 1049
EFI Intel Gigabit UNDI - 0.1.00
OROM Intel Boot Agent CL - 0.1.16

Microcodes
Xeon / CPUID 50650 / 8000002B / 2016-02-08
Xeon / CPUID 50652 / 80000037 / 2017-05-02
79x0xe / CPUID 50654 / 02006B0 / 2021-01-15
99x0xe / CPUID 50656 / 4003006 / 2020-12-31
109x0xe / CPUID 50657 / 5003101 / 2021-01-15

Link https://drive.google.com/file/d/1Av9...ew?usp=sharing

This is for Rampage IV extreme encore ?


Can you please mod this bios with all the latest available its (based on 901 also moded by you)

https://drive.google.com/file/d/1ypZ...jhUMk-f7e/view

cheers

[einsindrei]

This is for Rampage IV extreme encore ?


Can you please mod this bios with all the latest available its (based on 901 also moded by you)

https://drive.google.com/file/d/1ypZ...jhUMk-f7e/view

cheers

Yes, it is for Encore.

Here your requested moded with latest modules and microcodes https://drive.google.com/file/d/1KoA...ew?usp=sharing

EFI Intel RST for SATA - 18.31.1.5224
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 7.0.0.2008
OROM VBIOS SKL-KBL - 1049
EFI Intel Gigabit UNDI - 0.1.00
OROM Intel Boot Agent CL - 0.1.16
CPU 50650 8000002B
CPU 50652 80000037
CPU 50654 02006B05
CPU 50656 04003006
CPU 50657 05003101

[TSportM]

Yes, it is for Encore.

Here your requested moded with latest modules and microcodes https://drive.google.com/file/d/1KoA...ew?usp=sharing

EFI Intel RST for SATA - 18.31.1.5224
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 7.0.0.2008
OROM VBIOS SKL-KBL - 1049
EFI Intel Gigabit UNDI - 0.1.00
OROM Intel Boot Agent CL - 0.1.16
CPU 50650 8000002B
CPU 50652 80000037
CPU 50654 02006B05
CPU 50656 04003006
CPU 50657 05003101

thanks

the 701 is the shamino 0070 with rebar? right ?

wicht do think is better that or this one ?

cheers best regards

[Desertum_0]

Yes, it is for Encore.

Here your requested moded with latest modules and microcodes https://drive.google.com/file/d/1KoA...ew?usp=sharing

EFI Intel RST for SATA - 18.31.1.5224
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 7.0.0.2008
OROM VBIOS SKL-KBL - 1049
EFI Intel Gigabit UNDI - 0.1.00
OROM Intel Boot Agent CL - 0.1.16
CPU 50650 8000002B
CPU 50652 80000037
CPU 50654 02006B05
CPU 50656 04003006
CPU 50657 05003101

Much appreciated for your keen help there mate.

I am currently using the 5003006 microcode for my 10940x on my Rampage encore and I am not sure if i should flash this modded bios since I can not really see for which CPU is intended.

Also, I do not own a 3000 series to have the advantage of re bar but maybe you could explain in more detail if your current modded bios does have that feature.

Thanks a lot.

[Int8bldr]

Much appreciated for your keen help there mate.

I am currently using the 5003006 microcode for my 10940x on my Rampage encore and I am not sure if i should flash this modded bios since I can not really see for which CPU is intended.

Also, I do not own a 3000 series to have the advantage of re bar but maybe you could explain in more detail if your current modded bios does have that feature.

Thanks a lot.

The 10 series have CPUID=50657 so the modded bios have the latest ucode 05003101 for 109xx which include 10940 X. Your 5003006 is older.

FYI. It's kind of logical the numbering of the CPUIDs:

CPUID=50654 is core i9 79xx X
CPUID=50656 is core i9 99xx X
CPUID=50657 id core i9 109xx X

CPUID=50655 would have been 89xx X but as far as I know 89xx X does not exist so CPUID 50655 is unused.

[TSportM]

Is this latest mc 3101 better then 3001 i did not like 3006. Better performance?

O bios 901 for me ia great for overclock (no matter teu mc) on My 10980xe have not tryed 701 rebar, 3000 series *partners have to release the vbios for the suport.

[rulik006]

Well said.
I had a hard time trying to get 4000MHz (F4-4000C18Q2-64GTZR) on 10980XE and VI extreme encore. I mean it works fine even with CL 17,16, but there is always coold boot issue, so the best stable result i was able to do is 3800MHz 16-16-16-32-301-1T with 1.35V, VCCIO 1V and VCCSA 0.800V.
Can You please post your Aida64 memory benchmark? I would like to compare it with mine. Thanks in advance!

VCCIO/VCCSA on SK-X do not affect on memory overcloking.
Uncore voltage that is matter. Asus bios do not show actual voltage, but on EVGA x299 Dark can monitor it
default 0,85-0,95 , safe +400mv for 4000/4200
Also, some cpu's has bad one of IMC, and cannot overclock beyond DDR4-3400 with uncore under 1.35v