Modded bios Rampage VI

**Cherry[PL]** · 03-24-2021 07:13 AM

Originally Posted by rulik006

VCCIO/VCCSA on SK-X do not affect on memory overcloking.
Uncore voltage that is matter.

Funny, because it's different in my case. I can leave uncore auto and no problem, but if VCCIO is too low, specially upper 3600 MHz then ''memory detect'' appears.

**tistou77** · 03-24-2021 08:23 AM

VCCIO and VCCSA affect the memory OC

**BenJW** · 03-24-2021 02:47 PM

Originally Posted by Cherry[PL]

Funny, because it's different in my case. I can leave uncore auto and no problem, but if VCCIO is too low, specially upper 3600 MHz then ''memory detect'' appears.

Same here, I need to increase VCCIO for high frequency RAM to be able to boot with XMP settings applied.

**BigJohnny** · 03-27-2021 03:20 AM

Yep need high VCCIO and VCCSA. I have btoh of mine at 1 or 1.1, cant remember but Ill double check next time Im in BIOS. Also dont be aftraid to jack the Vram either/ My XMP is 1.35 but I run it at 1.45 with OC and mesh min at 28 and max at 32. It stays at 32 when I boot though. Also raised that to 1.15

**brogadget** · 03-29-2021 10:49 AM

Originally Posted by Cherry[PL]

Increase your cache. I didn't play with it much, but 3GHz boosted my write speed from 80 to around 100.

Thanks, cash already @32x, aida 26x post is wrong, because of energy saving option. NB/cash runs from 26x to 32x setup in bios.

VCCIN @2.0V, VTT IMC @1.25V, VCCIO @1.25V, SA/ VCCSA @1.15V, PCH @1,05V (according to HWINFO64): Entered bios values are slightly lower.

Everything more than RAM @4000Mhz crashes or does not post, except when raising the BCLK a bit e.g. 100.200 instead of 100.000, but BCLK OC is not stable. Running BCLK @100.100 Mhz which is 4008 Mhz on RAM, I found is my CPU/ board limit without add. cooling.

edit: btw HWinfo shows a value called "VIN9" (at leat on my sensor status page) Voltage running most of the time between 0.864 and sometimes even >1.0 to 1.05V, depending on VCCIO/ VCCSA and IMC Voltage settings in bios, which I believe is DMI Voltage?

**TSportM** · 03-30-2021 03:23 PM

Hello.

Nvidia release today the new drivers that suports rebar, any news on a new oficial bios for rebar ?

cheers

**Boofster** · 03-30-2021 06:18 PM

Is there a modded release for R6E with the 3403 bios?
Hopefully with rebar

**SlayeRC** · 03-30-2021 06:24 PM

Originally Posted by Boofster

Is there a release for R6E with the 3403 bios?
Hopefully with rebar

Yep. New bios versions for several mainboards are available on ASUS Support webpage.
Version 3403 for APEX, Extreme , Omega ... but not for ENCORE so far.

2021/03/25 9.83 MBytes

I can confirm that all of them are Re-Bar enabled bioses. I am running my APEX modded 3403 bios that includes:
EFI Intel RST for SATA - 18.31.1.5256
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 7.0.0.2008

EFI Intel Gigabit UNDI - 0.0.29
OROM Intel Boot Agent CL - 0.1.16

uCode 3101 CL-X

So far so good!

**TSportM** · 03-31-2021 07:53 AM

bios 1003 is available for the EE

Originally Posted by Silent Scone@ROG

List of ROG boards with REBAR Support for X299. The release for some of these updates are staggered. Some vendors are still to release VBIOS updates, too.

ROG RAMPAGE VI EXTREME ENCORE 1003
ROG RAMPAGE VI EXTREME OMEGA 3402
ROG RAMPAGE VI EXTREME 3402
ROG STRIX X299-E GAMING 3402
ROG STRIX X299-E GAMING II 1003
ROG STRIX X299-XE GAMING 3402
PRIME X299-DELUXE II 3402
ROG RAMPAGE VI APEX 3402
TUF X299 Mark 2 3402
TUF X299 Mark 1 3402
PRIME X299-A 3402
PRIME X299-DELUXE 3402
PRIME X299 EDITION 30 1003
PRIME X299-A II 1003
WS X299 SAGE 3403
WS X299 PRO 3403
WS X299 PRO/SE 3403
WS X299 SAGE/10G 3403
Pro WS X299 SAGE II 1003

When its available the gurus could update for the latest modules and MC

@einsindrei using the last one i asked you to mod working great

cheers

**Boofster** · 03-31-2021 09:23 AM

Can you please share! I have the APEX as well

Is there a legit sauce for these individually? I suppose I can patch them in myself but cherry picking from other releases is such a pain.

Originally Posted by SlayeRC

Yep. New bios versions for several mainboards are available on ASUS Support webpage.
Version 3403 for APEX, Extreme , Omega ... but not for ENCORE so far.

2021/03/25 9.83 MBytes

I can confirm that all of them are Re-Bar enabled bioses. I am running my APEX modded 3403 bios that includes:
EFI Intel RST for SATA - 18.31.1.5256
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 7.0.0.2008

EFI Intel Gigabit UNDI - 0.0.29
OROM Intel Boot Agent CL - 0.1.16

uCode 3101 CL-X

So far so good!

Cherry[PL] PC Specs
Motherboard	RAMPAGE VI EXTREME ENCORE
Processor	i9 10980XE
Memory (part number)	F4-4000C18Q2-64GTZR
Graphics Card #1	EVGA RTX 3090 FTW3
Sound Card	Creative Sound Blaster Recon3D PCIe Fatality Pro
Monitor	ROG PG279QM
Storage #1	Samsung 970 PRO 512GB
Storage #2	Samsung 970 PRO 1TB
CPU Cooler	Arctic L.F II 360
Case	Phanteks Enthoo Evolv X
Power Supply	EVGA Supernova 850 G3
Keyboard	Corsair K100 Optical-mechanical
Mouse	Zowie S1
Headset	Beyerdynamic DT770 PRO 80Ohm
Headset/Speakers	Logitech Z-5500
OS	W10 x64

tistou77 PC Specs
Motherboard	Rampage VI Extreme Encore
Processor	10980XE @4.6Ghz
Memory (part number)	G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
Graphics Card #1	EVGA RTX 2080ti XC Ultra
Sound Card	Xonar Phoebus
Monitor	Dell U2721DE
Storage #1	Intel Optane 905P PCIe
Storage #2	Samsung 980 Pro
CPU Cooler	Watercooling
Case	Lian Li A77F
Power Supply	Seasonic Prime Ultra Titanium 1000W
Keyboard	Logitech LIK
Mouse	Logitech MX revolution
OS	Windows 10 Pro x64

brogadget PC Specs
Motherboard	Rampage VI Apex 3601 Bios MOD
Processor	i9-10980XE, 10c@4.6Ghz, 8c@5.0Ghz, 1.27V
Memory (part number)	4x F4-3600C16-8GVK @4000Mhz 1.45V
Graphics Card #1	HIS R9 280X Turbo Boost @PCIEX16_3 slot
Graphics Card #2	HIS R9 280X Turbo Boost @PCIEX8_4 slot
Sound Card	R6A onboard
Monitor	#1: LG 34WL850-W, #2: NEC LCD2690WUXi2
Storage #1	ASUS Hyper Raid0 @PCIEX16_1 slot
Storage #2	4x Lenovo SSDPEKKF512G8L @ Hyper card
CPU Cooler	Kryos Next Vision (Aquacomputer)
Case	CM Cosmos II
Power Supply	Corsair HX1200
Keyboard	Logitech G915 TKL
Mouse	Logitech MX Master 2S
OS	W10 pro
Accessory #1	Vroc Stadard Key for Hyper Raid0

TSportM PC Specs
Laptop (Model)	ASUS ROG G751JY
Motherboard	Z690 Maximus extreme
Processor	12900k@5.400mhz
Memory (part number)	gskill ddr4 Royal gold 3600@3800
Graphics Card #1	Geforce RTX 3090@2100mhz
Sound Card	onboard
Monitor	32:9 samsung C49H/ 2X asus 27 / 1X LG34
Storage #1	crucual 1 tb nme 4.0
Storage #2	4xraid0 1tb wd black / 2Xsamsung SSD 850evo 2TB
CPU Cooler	Custom LOOP
Case	Corsair 1000D
Power Supply	Corsair 1500i
Keyboard	ASUS Claymore II
Mouse	ASUS Chakram
Headset	AStro A50
Mouse Pad	ASUS SHEATH
Headset/Speakers	Logitech Z5500 digital
OS	windows 11 pro 64bit
Network Router	asus GT - AX11000

TSportM PC Specs
Laptop (Model)	ASUS ROG G751JY
Motherboard	Z690 Maximus extreme
Processor	12900k@5.400mhz
Memory (part number)	gskill ddr4 Royal gold 3600@3800
Graphics Card #1	Geforce RTX 3090@2100mhz
Sound Card	onboard
Monitor	32:9 samsung C49H/ 2X asus 27 / 1X LG34
Storage #1	crucual 1 tb nme 4.0
Storage #2	4xraid0 1tb wd black / 2Xsamsung SSD 850evo 2TB
CPU Cooler	Custom LOOP
Case	Corsair 1000D
Power Supply	Corsair 1500i
Keyboard	ASUS Claymore II
Mouse	ASUS Chakram
Headset	AStro A50
Mouse Pad	ASUS SHEATH
Headset/Speakers	Logitech Z5500 digital
OS	windows 11 pro 64bit
Network Router	asus GT - AX11000

Thread: Modded bios Rampage VI

Thread Tools

Search Thread

Display

Posting Permissions