Modded bios Rampage VI

[Cherry[PL]]

VCCIO/VCCSA on SK-X do not affect on memory overcloking.
Uncore voltage that is matter.

Funny, because it's different in my case. I can leave uncore auto and no problem, but if VCCIO is too low, specially upper 3600 MHz then ''memory detect'' appears.

[tistou77]

VCCIO and VCCSA affect the memory OC

[BenJW]

Funny, because it's different in my case. I can leave uncore auto and no problem, but if VCCIO is too low, specially upper 3600 MHz then ''memory detect'' appears.

Same here, I need to increase VCCIO for high frequency RAM to be able to boot with XMP settings applied.

[BigJohnny]

Yep need high VCCIO and VCCSA. I have btoh of mine at 1 or 1.1, cant remember but Ill double check next time Im in BIOS. Also dont be aftraid to jack the Vram either/ My XMP is 1.35 but I run it at 1.45 with OC and mesh min at 28 and max at 32. It stays at 32 when I boot though. Also raised that to 1.15

[brogadget]

Increase your cache. I didn't play with it much, but 3GHz boosted my write speed from 80 to around 100.

Thanks, cash already @32x, aida 26x post is wrong, because of energy saving option. NB/cash runs from 26x to 32x setup in bios.

VCCIN @2.0V, VTT IMC @1.25V, VCCIO @1.25V, SA/ VCCSA @1.15V, PCH @1,05V (according to HWINFO64): Entered bios values are slightly lower.

Everything more than RAM @4000Mhz crashes or does not post, except when raising the BCLK a bit e.g. 100.200 instead of 100.000, but BCLK OC is not stable. Running BCLK @100.100 Mhz which is 4008 Mhz on RAM, I found is my CPU/ board limit without add. cooling.

edit: btw HWinfo shows a value called "VIN9" (at leat on my sensor status page) Voltage running most of the time between 0.864 and sometimes even >1.0 to 1.05V, depending on VCCIO/ VCCSA and IMC Voltage settings in bios, which I believe is DMI Voltage?

[TSportM]

Hello.

Nvidia release today the new drivers that suports rebar, any news on a new oficial bios for rebar ?


cheers

[Boofster]

Is there a modded release for R6E with the 3403 bios?
Hopefully with rebar

[SlayeRC]

Is there a release for R6E with the 3403 bios?
Hopefully with rebar

Yep. New bios versions for several mainboards are available on ASUS Support webpage.
Version 3403 for APEX, Extreme , Omega ... but not for ENCORE so far.

2021/03/25 9.83 MBytes

I can confirm that all of them are Re-Bar enabled bioses. I am running my APEX modded 3403 bios that includes:
EFI Intel RST for SATA - 18.31.1.5256
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 7.0.0.2008

EFI Intel Gigabit UNDI - 0.0.29
OROM Intel Boot Agent CL - 0.1.16

uCode 3101 CL-X


So far so good!

[TSportM]

bios 1003 is available for the EE

List of ROG boards with REBAR Support for X299. The release for some of these updates are staggered. Some vendors are still to release VBIOS updates, too.

ROG RAMPAGE VI EXTREME ENCORE 1003
ROG RAMPAGE VI EXTREME OMEGA 3402
ROG RAMPAGE VI EXTREME 3402
ROG STRIX X299-E GAMING 3402
ROG STRIX X299-E GAMING II 1003
ROG STRIX X299-XE GAMING 3402
PRIME X299-DELUXE II 3402
ROG RAMPAGE VI APEX 3402
TUF X299 Mark 2 3402
TUF X299 Mark 1 3402
PRIME X299-A 3402
PRIME X299-DELUXE 3402
PRIME X299 EDITION 30 1003
PRIME X299-A II 1003
WS X299 SAGE 3403
WS X299 PRO 3403
WS X299 PRO/SE 3403
WS X299 SAGE/10G 3403
Pro WS X299 SAGE II 1003

When its available the gurus could update for the latest modules and MC

@einsindrei using the last one i asked you to mod working great

cheers

[Boofster]

Can you please share! I have the APEX as well

Is there a legit sauce for these individually? I suppose I can patch them in myself but cherry picking from other releases is such a pain.

Yep. New bios versions for several mainboards are available on ASUS Support webpage.
Version 3403 for APEX, Extreme , Omega ... but not for ENCORE so far.

2021/03/25 9.83 MBytes

I can confirm that all of them are Re-Bar enabled bioses. I am running my APEX modded 3403 bios that includes:
EFI Intel RST for SATA - 18.31.1.5256
OROM Intel RST for SATA - 18.35.0.4635
EFI Intel VROC for SATA - 7.5.0.1030
EFI Intel VROC with VMD - 7.5.0.1030
OROM Intel VROC for SATA - 7.0.0.2008

EFI Intel Gigabit UNDI - 0.0.29
OROM Intel Boot Agent CL - 0.1.16

uCode 3101 CL-X


So far so good!