In the BIOS Q-Fan Control when I set the CPU Fan profile to manual all of the profile sliders are set to 100% fan speed regardless of temperature and I can not change them. When set to manual the CPU fan runs at 100% regardless of temperature and I cannot set a custom profile.
Is this normal for the BIOS Q-Fan Control to force the CPU fan to run at 100% when the profile is set to manual mode and you cannot move the sliders and setup a custom profile?
I am on BIOS 1301.
Chassis fans 1, 2,3 and the hi-amp fan are fine, I can setup a customer profile for all four.