Results 1 to 2 of 2
  1. #1
    ROG Enthusiast Array idahosurge PC Specs
    idahosurge PC Specs
    MotherboardRampage VI Extreme
    Processor7820X @ 46 GHz / 3200 MHz
    Memory (part number)G.Skill F4-3600C15D-16GTZ (2 Kits 32 GB)
    Graphics Card #1Zotac Amp Extreme GTX 1080 Ti
    MonitorAlienware AW3418DW 34" GSync
    Storage #1OS - Samsung 850 Pro 513 GB
    Storage #2Backup - Samsung 850 Pro 1 TB
    CPU CoolerThermalright Archon IB-E x2
    CaseCooler Master HAF X
    Power SupplyCorsair AX860i
    Keyboard Corsair K95 RGB Platinum
    Mouse Logitech G703 Lightspeed
    OS Windows 10 Pro - 1709
    idahosurge's Avatar
    Join Date
    Nov 2017

    BIOS Q-Fan Control Issue With CPU Fan - No Manual Profile Control

    In the BIOS Q-Fan Control when I set the CPU Fan profile to manual all of the profile sliders are set to 100% fan speed regardless of temperature and I can not change them. When set to manual the CPU fan runs at 100% regardless of temperature and I cannot set a custom profile.

    Is this normal for the BIOS Q-Fan Control to force the CPU fan to run at 100% when the profile is set to manual mode and you cannot move the sliders and setup a custom profile?

    I am on BIOS 1301.

    Chassis fans 1, 2,3 and the hi-amp fan are fine, I can setup a customer profile for all four.

  2. #2
    ROG Enthusiast Array Quozzo PC Specs
    Quozzo PC Specs
    MotherboardAsus Rampage VI Extreme 0802
    ProcessorCore i9 7900X delidded 4.9GHz @ 1.26v
    Memory (part number)32GB G-Skill Trident Z 3600CL15 @ 1.4v
    Graphics Card #1nVidia 1080Ti FE +175/+750
    Graphics Card #2nVidia 1080Ti FE +150/+500
    MonitorAcer Predator 27" 4K60 IPS G-Sync
    Storage #1Samsung 2TB 960 EVO NVMe
    Storage #2Corsair MX200 1TB && 1TB Toshiba NVMe
    CPU CoolerCustom Water Loop - 2x EKWB 480 XE, 1x EKWB 240 XE
    CaseCorsair Obsidian 900D
    Power SupplyCorsair AX1500i
    Keyboard Logitech G19
    Mouse Razer Naga Epic Chroma
    Headset Sades SA903
    Mouse Pad Yes
    OS Windows 10 FCU
    Network RouterVirgin Superhub 3
    Quozzo's Avatar
    Join Date
    Nov 2017

    I don't use the BIOS fan controller but I do use Asus Suit for the fan controller. There, the CPU fan is the only one that I can't alter the source for, so it is constantly monitoring the CPU temp and adjusting the fan speed accordingly. I can turn it on manual mode and set the limit to 75c before the fans go to max but below that I can set the speed based on temp, which is at 50% for everything up until 75c.

    My BIOS isnt 0802 as suggested in my PC Specs but maybe try the other bios to see if the same thing occurs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts