Results 1 to 3 of 3
  1. #1
    ROG Guru: White Belt Array
    Join Date
    Jan 2013
    Reputation
    12
    Posts
    91

    New Build: Rampage VI Extreme Omega + VROC HYPER M.2 X16 CARD

    Hi Guys,

    Putting together a new build which I want to begin very soon and have come across the Asus HYPER M.2 X16 CARD. I'll buy this and put in 4 x M.2 Drives and would like to run VROC.

    I've read that you need to buy a VROC Key which plugs into the motherboard?

    Where do we buy these from?


    Thanks.
    MB: ASUS Rampage V Extreme
    CPU: Intel Core i7 5960X Extreme Edition
    RAM: Dominator® Platinum Series 32GB (4 x 8GB) DDR4 DRAM 2800MHz
    PSU: Corsair AX1200i Digital ATX Modular
    GFX: 3 x EVGA GTX Titan Black Superclocked 6GB
    SSD: 2 x Samsung 850 Pro Series 512Gb SSD Raid 0
    HDD: 2 x WD4003FZEX WD Black 4TB Raid 0
    1234;
    2 x WD1000DHTZ WD VelociRaptor 1TB Raid 0
    MON: Dell Ultra Sharp 32 Ultra HD Monitor - UP3214Q
    CASE: Silverstone Temjin TJ11 Black with Window Case
    OS: Win7 x64bit

  2. #2
    ROG Guru: Yellow Belt Array G75rog PC Specs
    G75rog PC Specs
    MotherboardR VI Apex
    ProcessorI9-7900X
    Memory (part number)64GB Gskill Trident Z
    Graphics Card #1AMD Radeon VII EKWB water block
    Graphics Card #2Waste of PCI lanes in NVME environment
    Sound CardStock
    MonitorLG 34" Ultra Wide3440x1440
    Storage #14ea 960 Pro 2TB, 2ea 970 Evo 2TB
    Storage #21ea 960 Pro 1 TB, 1ea 970 Pro 1TB
    CPU CoolerEKWB CPU, Swiftech Res/pump, 400mm Rad
    CaseThermaltake View 91
    Power SupplyNZXT Hale 90 1200W
    Keyboard Logitech G910
    Mouse Razer Ouroboros
    OS W10 64 1809, 1903, Ubuntu Linux
    Network RouterNetgear R9000 + 4ea R9000 AP's, 10 Gb Switch
    Accessory #1 Hyper M.2 X16 V2
    Accessory #2 10GB network via Intel 550 Nic
    Accessory #3 2 10GB Asustor NAS 7000 series

    Join Date
    Jan 2013
    Reputation
    12
    Posts
    245

    There are a few previous threads discussing VROC use and sources you can peruse.
    Be aware you'll need 16 lanes to use 4 drives in the Hyper m.2 X16 card.

  3. #3
    New ROGer Array tcomservice PC Specs
    tcomservice PC Specs
    MotherboardAsus Ws x299 Sage /10G
    ProcessorIntel 7980ex
    Memory (part number)Dominator 32GB CMD32GX4M4E4000C19
    Graphics Card #1EVGA GeForce GTX 1080 Ti FTW3
    Graphics Card #2EVGA GeForce GTX 1080 Ti FTW3
    Sound CardOn Board
    MonitorMain 27" 4K HDR Photographer Monitor | SW271 Plus x 2 I-Inc iH-282HPB - 28"
    Storage #1intel 7000p boot
    Storage #2Other M.2 760p, SSD and Hard drives
    CPU CoolerCustom water cooling
    CaseCustom Build
    Power SupplyCORSAIR AX1600i
    Keyboard Logitec
    Mouse logitech MX master 2s
    Headset/Speakers Logitec 7.1
    OS Win 10 Pro
    Network RouterASUS AC5300
    Accessory #1 Asus Hyper with x4 intel 7600p but not configure yet

    Join Date
    Aug 2018
    Reputation
    10
    Posts
    1

    Angry

    My goal is to run 2 GPU cards with SLI configuration Asus hyper board with x 4 NVME drives with Raid 0 and boot with Vrac at the beginning maybe later switch to raid 1 or 5.
    *I'm was trying to build a similar system on Ws x299 Sage/10G board, unfortunately, this board will not support Asus Hyper board. So my next step required to change my motherboard.
    I know that Rampage VI extreme will work and allowed PCIe slot bifurcation to x16 x4x4x4x4.

    A) My question will be here it will support any PCIe slot or there are only dedicated PCIe slots? *
    B) Rampage VI extreme Omega will be able to do the same bifurcation?

    So far the facts are to help us at the beginning : Windows® 10 is the only OS supported by VROC on chipset X299.

    1) You need ( I did not research for AMD) for Intel CPU need motherboard x299 with PCIe x8 bifurcation x4x4 for 2 drive and PCIe x16 bifurcation x4x4x4x4 for 4 drives

    2) You need CPU with enough CPU lines recommended CPU Skylake-X Processors Core i7-7800X X-series 28 line Core i9-7900XX-series 44 lines, Intel® Core™ i9-9900X X-series 44 lines

    3) Vroc key not required if you build only raid 0 for the other 1.5.10 you need Vroc key VROCISSDMOD available on Mouser.com US$229

    4) Vroc will boot with only supported NVME drives and so far I see only Intel drives, people confirmed intel 600p will work 760p will not work, Intel only confirm that Intel 7600p work as this is a professional version drive p at the end stands for PCI, not Professional

    5) Also required to be patient, it is not enough information on this subject and support from anywhere.

    Some people claim that they run this configuration.
    *I would like to see step by step this configuration from the Guru Guys with pictures or on YouTube if someone already run or know where to find this please show us *
    Last edited by tcomservice; 02-20-2019 at 08:59 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •