fulcrum_64th wrote:
hmm yes thanks. My question is can one clearly see in the bios what drive corresponds to what position on the MOBO...
Should be in the manual. I don't have your board but typically the M.2 slots are enumerated just like SATA ports.*
Or just start with your boot drive installed and don't add the 2nd drive until later. That way you will be sure to install to the drive you want.
*Actually the port identifications should be printed on the PCB next to the slot so you really don't even need the manual.
A bus station is where a bus stops. A train station is where a train stops. On my desk, I have a work station…