02-16-2019 07:53 PM - last edited on 03-06-2024 08:43 PM by ROGBot
02-16-2019 09:16 PM
02-16-2019 10:07 PM
rjbarker wrote:
The key to voltage are what VID is.....what you set in BIOS...what desktop idle is and what 100% Load is.....write these numbers down and play with adjusting settings and Loadline Calibration.......try and find the lowest possible vcore (under load) stable....once you start playing around with the Adaptive Voltage and LLC...running and noting voltages under load....you;ll start to see the pattern .....some vDroop and some overshoot.....the end goal is stil the same....
02-17-2019 01:34 AM
02-17-2019 02:36 AM
Silent Scone@ASUS wrote:
Yes, this is normal. It is not possible to set the Additional Turbo Voltage to less than the stock VID for a given ratio without the use of the offset function.
02-17-2019 03:24 PM
02-17-2019 07:05 PM
02-17-2019 11:02 PM
Jc.852 wrote:
My chip is under 240mm AIO cooling and the cores reached 67 C max( not yet hammered my chip, just normal test bench)
I am going to lower the voltage a little bit more to acheive 1.28 underload I think
My Bios version have no Auto offset value so yeah I will just leave it at -0.01
What is the function of SVID? I set it to best case scenario according to the oc guides...*
It is described as having better temp like that in bios*
Anyway, thanks again for your sharing!*
02-17-2019 11:04 PM
rjbarker wrote:
I hit 80c stress testing my 5 Ghz OC with a Custom Loop using 480*360*240 Radiators.....if youre only hitting 67c Max with a 240 AIO you arent stress testing properly 😉
02-18-2019 08:23 PM