Entered cli of ax11000 router to check if gamer port do support 2.5G
GT-AX11000:/bin# ethctl eth0 media-type
Auto-Negotiation: Enabled
PHY Capabilities: 1GFD|1GHD|100MFD|100MHD|10MFD|10MHD
Link is Up at Speed: 1G, Duplex: FD
GT-AX11000:/bin# ethctl eth1 media-type
Auto-Negotiation: Enabled
PHY Capabilities: 1GFD|1GHD|100MFD|100MHD|10MFD|10MHD
Link is Down.
GT-AX11000:/bin# ethctl eth2 media-type
Auto-Negotiation: Enabled
PHY Capabilities: 1GFD|1GHD|100MFD|100MHD|10MFD|10MHD
Link is Down.
GT-AX11000:/bin# ethctl eth3 media-type
Auto-Negotiation: Enabled
PHY Capabilities: 1GFD|1GHD|100MFD|100MHD|10MFD|10MHD
Link is Down.
GT-AX11000:/bin# ethctl eth4 media-type
Auto-Negotiation: Enabled
PHY Capabilities: 1GFD|1GHD|100MFD|100MHD|10MFD|10MHD
Link is Down.
GT-AX11000:/bin# ethctl eth5 media-type
Auto Detection of Serdes: Enabled
PHY Capabilities: 1GFD
Link is Down.
eth5 are gamer port -> PHY Capabilities 1GFD <- shouldn't this be 2.5G ? Mine 10G switch (multigigabit support) only gets 1Gbit connection to gamer port.
Anyone knows why ?
Tested some more ethctl eth5 commands... ethctl eth5 media-type auto I can see 2.5G force it to 2.5 with ethctl eth5 media-type 2500FD
GT-AX11000:/tmp/home/root# ethctl eth5 media-type auto
Auto Detection of Serdes: Enabled
PHY Capabilities: 2.5GFD|1GFD|100MFD
Link is Down.
force it to 2.5G ->
GT-AX11000:/tmp/home/root# ethctl eth5 media-type 2500FD
Auto Detection of Serdes: Disabled; Configured Speed: 2.5G; Duplex: FD
PHY Capabilities: 2.5GFD
Link is Up at Speed: 2.5G, Duplex: FD
Switch fails connect to router at this speed setting.. not sure what else I can try
Stenvik