02-19-2019 09:54 AM - last edited on 03-06-2024 08:38 PM by ROGBot
02-19-2019 09:56 AM
02-19-2019 10:21 AM
Hopper64 wrote:
BTW-I noticed after the crash this morning that my Uncore voltage was reset to auto after hitting F1 to save the memory settings.
All hardware is in my signature.
02-19-2019 10:26 AM
jpmboy wrote:
what CPU is that you have running 4900 at that vcore?
I suspect 1.35V VDIMM is low for 64GB at 4000 on (any) ram kit
02-19-2019 10:36 AM
Hopper64 wrote:
Click on my spec list, red bar on the left. 9800X.
02-19-2019 10:06 AM
02-19-2019 10:23 AM
Silent Scone@ASUS wrote:
I would consider running Ramtest as it's a more stringent test of stability than HCI. If not overclocking the uncore, I wouldn't be concerned with setting a manual offset.
What VVCSA / VCCIO are you running for 4K memory frequency?
02-19-2019 01:16 PM
Hopper64 wrote:
They are on Auto. Any suggestions on voltages?
02-19-2019 02:17 PM
Silent Scone@ASUS wrote:
The voltages look quite low for frequency and density. Try in the region of 0.950-1v VCCSA and 1.05-1.1v VCCIO.
02-20-2019 12:34 AM
Hopper64 wrote:
I bumped the VDIMM voltage and testing next few days. Wanted to test one parameter at a time. Should I try to change these voltages after bumping the VDIMM per earlier posts? Others recommended to leave these on Auto. Thanks.