Maximus XI Extreme need help with bios

[SK8]

This is the part I hate not a fan of doing this on desktop as its new to me but this part kills me so scared of a error lol

[Phillyflyer]

mm I have cpuid HWMonitor up will this work... 28min in no errors and fingers so crossed praying to the PC gods lol

Attachment 79578

SA 1.424v and IO 1.328v...way too high...need to adjust down....at least now...you know ram can run rated speed...please adjust SA to 1.30v and IO to 1.25v...see if your able to boot

[SK8]

I downloaded the HWIFO64 as I do not have it its on this laptop for now when not testing I will get it on main rig as I am scared to do anything when testing lol. This sec 47min in no errors :] Ok why is it to high when on auto / bad for CPU I take it? Dont forget all this voltage stuff is new to me still so please fill me in so I learn more :]

PS... Very interesting on this bios it took like this and on the newest bios fail fail fail when tried like this. New bios not always the one to use case in point never had it pass this long ever 2 min away from a hr test :} And THANK YOU FOR ALL THE HELP SO FAR !!!!

[SK8]

Dang :/ 1hr13 min in Error

[Phillyflyer]

I downloaded the HWIFO64 as I do not have it its on this laptop for now when not testing I will get it on main rig as I am scared to do anything when testing lol. This sec 47min in no errors :] Ok why is it to high when on auto / bad for CPU I take it? Dont forget all this voltage stuff is new to me still so please fill me in so I learn more :]

PS... Very interesting on this bios it took like this and on the newest bios fail fail fail when tried like this. New bios not always the one to use case in point never had it pass this long ever 2 min away from a hr test :} And THANK YOU FOR ALL THE HELP SO FAR !!!!

NP...glad to help...Auto tends to set voltages higher than what is needed to insure stability

[SK8]

Well it failed stability :/ So now what should I try? Or just leave it for today and think on it until tomorrow as we have been at this over 10hrs lol time goes fast in bios war lol

[Phillyflyer]

Well it failed stability :/ So now what should I try? Or just leave it for today and think on it until tomorrow as we have been at this over 10hrs lol time goes fast in bios war lol

It's a start !!
Adjust the timing to 18-18-18-38-2T....adjust SA voltage down to 1.30v and IO down to 1.25v....call it a day...will check back in the morning

[SK8]

Just seen your post doing it now :] BTW its 2N for me not sure this is a big deal but to be safe...Edit in windows running test

[SK8]

Ahh Dang failed 35min in

[Phillyflyer]

Ahh Dang failed 35min in

K....try SA and IO voltages both @ 1.3v