Maximus XI Extreme need help with bios

[Phillyflyer]

Did this and ya challenge in bios war lol fun times and I cant thank you enough for all the help your amazing :] Quick question and maybe dumb question should I enable Xtreme tweeking in bios?

set and testing this ....

Set to Manual
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.275v
CPU System Agent Voltage 1.325v
Dram timing control 18-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%

No need to set Xtreme Tweaking

[SK8]

This is what I have been told but I just don't buy into it as its a i9-9900k.... you may be running into a wall with the CPU's memory controller not being capable of running the RAM at that speed. How can I check into this ? And thanks did not think I need it on but wanted to ask :]

Dang error @ 24MIN

[Phillyflyer]

This is what I have been told but I just don't buy into it as its a i9-9900k.... you may be running into a wall with the CPU's memory controller not being capable of running the RAM at that speed. How can I check into this ?

Dang error @ 24MIN

Buy into it.....not every cpu is the same.....8600k...8700k...8086k...9700k...9900k etc....some overclock better than others...some have stronger IMC's than others...the person that gets both in a chip...has the Golden Egg !!!.....must say...I've been fortunate over the years with getting some decent chips...…..Its a matter of trial / error and tweaking if you got the patience / time....or the good old easy way...XMP...….tRY 4133mhz for the moment....same settings

[SK8]

Fair enough don't like it but fair enough . So it can still be done though with work or no?

OK done and testing

Set to Manual
Dram Frequency 4133MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.275v
CPU System Agent Voltage 1.325v
Dram timing control 18-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%

[SK8]

Update its still going scared to jinx it by posting this but 2hr 31min no error yet so I will let it go all night to see how far it will go.

Edit 3hr 11min No Error!

[SK8]

Best thing ever to wake up to :]

[Phillyflyer]

Best thing ever to wake up to :]

Congrats !!!.....Save those settings in the Asus bios profile 1....You can build on that by lowering the timings with 4133mhz and a better / lower latency....or try for the 4266mhz ..which I'm more than will to go for !!

[SK8]

No sh.. er No kidding of so sweet we have a winner at last :} Thank you so much :] Now what ? I want to still try for 4266 please

[Phillyflyer]

No sh.. er No kidding of so sweet we have a winner at last :} Thank you so much :] Now what ? I want to still try for 4266

Please save that bios profile....once saved...please change only the following....
dram frequency 4266mhz
dram timing...17-18-38-2N
VCCIO....1.25v
VCCSA...1.26v
Everything else will carry over from the saved profile...PC will likely double boot as part of the memory training

[SK8]

Ohhh it is so very very saved and will do settings in a sec just get you saved pic first boss :]