Maximus XI Extreme need help with bios

[SK8]

OK got a error 1hr 27min in. Do you want me to still set this next... Bump IO back to 1.25v and put SA to 1.27v

[Phillyflyer]

OK got a error 1hr 27min in. Do you want me to still set this next... Bump IO back to 1.25v and put SA to 1.27v

Bump IO to 1.25 and SA 1.27

[SK8]

Bump IO to 1.25 and SA 1.27

OK done and testing .....

Set to Manual OC
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.25v
CPU System Agent Voltage 1.27v
Dram timing control 17-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%

[SK8]

Its still going at 1hr 41min scared to jinx it want this to pass lol 3252%

with settings ...

Set to Manual OC
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.25v
CPU System Agent Voltage 1.27v
Dram timing control 17-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%

[SK8]

I jinxed it just failed :/ 1hr 45 min in

[SK8]

Ok just seen this in pm ... Bump SA to 1.28v.....

OK done and testing ...

Set to Manual OC
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.25v
CPU System Agent Voltage 1.28v
Dram timing control 17-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%

[SK8]

Interesting read this if you have time its on Karhu ram test read page 4 last post he spells it out well..... I don't think RAM stability can be tested so singlehandedly. Sometimes errors occur fast sometimes they take a while to pop. I've used RAMTest a lot while testing coffee lake memories with two different motherboards / processors. What i have found with RAMTest is that usually 2000%+ is a solid starting point that hardly gives problems in daily use, but latest errors on RAMTest have ocured to me at ~5000% mark. After 5000% i have never got any errors. Anything below 2000% i wouldn't even call 'semi-stable'. Maybe they can pass some benchmarking, but nothing to write home about with stability.

I usually test 24/7 for 10000% coverage just to see if i can find errors past 5000% smile.gif . Doesn't take longer than 2 - 3 hours. Depending on the speed of course.


https://www.overclock.net/forum/1805...-ram-test.html

[SK8]

And I just got a error at 57min 1835% ug lol
with ...

Set to Manual OC
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.25v
CPU System Agent Voltage 1.28v
Dram timing control 17-18-18-38
Mode1
------------------------------------------------

So this lasted longer 3252% before error 1hr 45 min error don't mind me trying to see your next move lol

with settings ...

Set to Manual OC
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.25v
CPU System Agent Voltage 1.27v
Dram timing control 17-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%

[Phillyflyer]

And I just got a error at 57min 1835% ug lol
with ...

Set to Manual OC
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.25v
CPU System Agent Voltage 1.28v
Dram timing control 17-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%

Set the SA @ 1.29v

[SK8]

OK Boss doing it now :}...testing so we are looking for above 5000% to fully pass I take it my question is answered lol I think . I would say I need it to pass past 5000% as I play games like BFV fully a pc / cpu hog so my rig must be very stable :]

Set to Manual OC
Dram Frequency 4266MHz
Dram voltage 1.45v
CPU VCCIO Voltage 1.25v
CPU System Agent Voltage 1.29v
Dram timing control 17-18-18-38
Mode1
Dram command rate set to 2N set dram current capability to 130%