Page 3 of 14 FirstFirst 1 2 3 4 5 13 ... LastLast
Results 21 to 30 of 135
  1. #21
    ROG Guru: Green Belt Array Phillyflyer's Avatar
    Join Date
    Mar 2012
    Reputation
    30
    Posts
    536

    Quote Originally Posted by SK8 View Post
    Well this was interesting tried to up the ram one more level up could not get into windows hit F5 in bios set it all back to default still could not get into windows no difference what I tried even clear cmos still no joy. I had to do a system restore point to get back into windows . Made it back into windows so now going to test this ram in default with Karhu RamTest if it fails then at least I know to RMA the ram as it has no xmp/ oc on it just now. If the ram fails my heart will sink but I am lucky as we do have another kit of this ram in the house for my husbands build and he still has a few parts to get yet.

    Edit ... If it passes the test with Karhu RamTest is anything wrong with the settings below at all ? I just do not get what I am doing wrong :/ Sadly I have not tested the ram yet with Karhu RamTest with the settings below yet so not sure it would pass either .

    Edit 2 ... If the ram passes then I will run sfc /scannow to be sure windows has zero issues still as well as I am not a fan of system restore at the best of times. I do know my windows had no issues yesterday so I have no idea why it would not boot into windows after I reset bios to default today as I checked all my bios settings more then a few times when this started .


    XMP2 and on 4000MHz
    Ram voltage is set to 1.45 v
    Dram voltage is set to 1.3 v
    CPU system Agent is set to 1.3 v
    In DRam timing control its on Maximus tweek 2
    ram timings set to 17,18,38
    Dram command rate set to 2N
    I would try relaxing the timings...18-18-18-38-2T or 18-19-19-38-2T with 4266mhz and XMP 1....as running that frequency does require a strong memory controller within the CPU especially while running all 4 slots populated with a quad kit....just something to think about....
    May wanna test the board with just 2 sticks and see if acquiring 4266mhz is easier with XMP enabled.
    Last edited by Phillyflyer; 03-17-2019 at 08:12 PM.
    Asus ROG Maximus XI EXTREME
    Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
    XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
    Swiftech Drive II / Swiftech MCP35X Pump
    Enermax Platimax 1200 Watt Power Supply
    32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
    MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
    (5)Samsung 840 Pro 128 GB In Raid 0
    (2) WD 1TB Black Edition
    Corsair 900 D

  2. #22
    ROG Guru: Yellow Belt Array SK8 PC Specs
    SK8 PC Specs
    MotherboardMaximus XI Extreme
    ProcessorIntel I9 - 9900K
    Memory (part number)DDR4 G.Skill Trident Z RGB 4266Mhz 32GB F4-4266C17Q-32GTZR
    Graphics Card #1ROG Strix OC 2080Ti
    MonitorSamsung 49" CHG90 QLED Gaming Monitor 144Hrz 1ms
    Storage #1Samsung 850 Pro X-Three-1TB
    CPU CoolerHydro Series H150i Pro RGB 360mm Liquid CPU Cooler
    CaseCorsair Obsidian Series 1000D
    Power SupplyCorsair HX 1200i
    Keyboard Corsair K70
    Mouse Corsair Sabre
    Headset Sennheiser Game Zero Headset
    Mouse Pad Corsair MM800 RGB POLARIS
    Headset/Speakers Sennheiser GSX 1000 Audio Amplifier
    OS Win 10 Enterprise 64bit
    Accessory #1 Logitech G13 handpad
    SK8's Avatar
    Join Date
    Jan 2016
    Reputation
    10
    Posts
    140

    Quote Originally Posted by Phillyflyer View Post
    I would try relaxing the timings...18-18-18-38-2T or 18-19-19-38-2T with 4266mhz and XMP 1....as running that frequency does require a strong memory controller within the CPU especially while running all 4 slots populated with a quad kit....just something to think about....
    May wanna test the board with just 2 sticks and see if acquiring 4266mhz is easier with XMP enabled.
    Thank you for the post back ok starting to feel like a FNG again lol. I did not know you could change the timings like this, I thought you had to use what was written on the ram / ram box lol.

    So to make sure I fully understand your saying do this below...

    XMP1 and on 4266MHz
    Ram voltage is set to 1.45 v
    Dram voltage is set to 1.3 v
    CPU system Agent is set to 1.3 v
    In DRam timing control its on Maximus tweek 2 Or would I use Maximus tweek 1 ?
    ram timings set to 18-18-18-38 or 18-19-19-38
    Dram command rate set to 2N
    Bios 602
    passed 8hr test on Karhu RamTest
    Set to Manual OC
    Dram Frequency 4266MHz
    Dram voltage 1.45v
    CPU VCCIO Voltage 1.25v
    CPU System Agent Voltage 1.29v
    Dram timing control 17-18-18-38
    Mode1
    Dram command rate set to 2N set dram current capability to 130%

  3. #23
    ROG Guru: Green Belt Array Phillyflyer's Avatar
    Join Date
    Mar 2012
    Reputation
    30
    Posts
    536

    Quote Originally Posted by SK8 View Post
    Thank you for the post back ok starting to feel like a FNG again lol. I did not know you could change the timings like this, I thought you had to use what was written on the ram / ram box lol.

    So to make sure I fully understand your saying do this below...

    XMP1 and on 4266MHz
    Ram voltage is set to 1.45 v
    Dram voltage is set to 1.3 v
    CPU system Agent is set to 1.3 v
    In DRam timing control its on Maximus tweek 2 Or would I use Maximus tweek 1 ?
    ram timings set to 18-18-18-38 or 18-19-19-38
    Dram command rate set to 2N
    Try Tweak 1 and lower the IO and SA voltages to 1.25v ...for the moment as higher voltages may also cause instability.
    Last edited by Phillyflyer; 03-17-2019 at 09:34 PM.
    Asus ROG Maximus XI EXTREME
    Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
    XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
    Swiftech Drive II / Swiftech MCP35X Pump
    Enermax Platimax 1200 Watt Power Supply
    32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
    MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
    (5)Samsung 840 Pro 128 GB In Raid 0
    (2) WD 1TB Black Edition
    Corsair 900 D

  4. #24
    ROG Guru: Yellow Belt Array SK8 PC Specs
    SK8 PC Specs
    MotherboardMaximus XI Extreme
    ProcessorIntel I9 - 9900K
    Memory (part number)DDR4 G.Skill Trident Z RGB 4266Mhz 32GB F4-4266C17Q-32GTZR
    Graphics Card #1ROG Strix OC 2080Ti
    MonitorSamsung 49" CHG90 QLED Gaming Monitor 144Hrz 1ms
    Storage #1Samsung 850 Pro X-Three-1TB
    CPU CoolerHydro Series H150i Pro RGB 360mm Liquid CPU Cooler
    CaseCorsair Obsidian Series 1000D
    Power SupplyCorsair HX 1200i
    Keyboard Corsair K70
    Mouse Corsair Sabre
    Headset Sennheiser Game Zero Headset
    Mouse Pad Corsair MM800 RGB POLARIS
    Headset/Speakers Sennheiser GSX 1000 Audio Amplifier
    OS Win 10 Enterprise 64bit
    Accessory #1 Logitech G13 handpad
    SK8's Avatar
    Join Date
    Jan 2016
    Reputation
    10
    Posts
    140

    Ok Thank you will do in a few just now testing the 4000HRz set up just to see if it will pass the Karhu RamTest as it passed mem test last night.
    Last edited by SK8; 03-17-2019 at 09:54 PM.
    Bios 602
    passed 8hr test on Karhu RamTest
    Set to Manual OC
    Dram Frequency 4266MHz
    Dram voltage 1.45v
    CPU VCCIO Voltage 1.25v
    CPU System Agent Voltage 1.29v
    Dram timing control 17-18-18-38
    Mode1
    Dram command rate set to 2N set dram current capability to 130%

  5. #25
    ROG Guru: Green Belt Array Phillyflyer's Avatar
    Join Date
    Mar 2012
    Reputation
    30
    Posts
    536

    Quote Originally Posted by SK8 View Post
    Ok Thank you will do in a few just now testing the 4000HRz set up just to see if it will pass the Karhu RamTest as it passed mem test last night.
    I think it will pass 4000mhz without issue
    Asus ROG Maximus XI EXTREME
    Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
    XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
    Swiftech Drive II / Swiftech MCP35X Pump
    Enermax Platimax 1200 Watt Power Supply
    32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
    MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
    (5)Samsung 840 Pro 128 GB In Raid 0
    (2) WD 1TB Black Edition
    Corsair 900 D

  6. #26
    ROG Guru: Yellow Belt Array SK8 PC Specs
    SK8 PC Specs
    MotherboardMaximus XI Extreme
    ProcessorIntel I9 - 9900K
    Memory (part number)DDR4 G.Skill Trident Z RGB 4266Mhz 32GB F4-4266C17Q-32GTZR
    Graphics Card #1ROG Strix OC 2080Ti
    MonitorSamsung 49" CHG90 QLED Gaming Monitor 144Hrz 1ms
    Storage #1Samsung 850 Pro X-Three-1TB
    CPU CoolerHydro Series H150i Pro RGB 360mm Liquid CPU Cooler
    CaseCorsair Obsidian Series 1000D
    Power SupplyCorsair HX 1200i
    Keyboard Corsair K70
    Mouse Corsair Sabre
    Headset Sennheiser Game Zero Headset
    Mouse Pad Corsair MM800 RGB POLARIS
    Headset/Speakers Sennheiser GSX 1000 Audio Amplifier
    OS Win 10 Enterprise 64bit
    Accessory #1 Logitech G13 handpad
    SK8's Avatar
    Join Date
    Jan 2016
    Reputation
    10
    Posts
    140

    Quote Originally Posted by Phillyflyer View Post
    I think it will pass 4000mhz without issue
    So do I it just passed the first hr @ 1442% no errors I think my brain needs a rest from this today and go play some BFV tonight, I will look at your settings tomorrow if my brain is not feeling on overload or in the next few days for sure. Thank you both for all the help.
    Bios 602
    passed 8hr test on Karhu RamTest
    Set to Manual OC
    Dram Frequency 4266MHz
    Dram voltage 1.45v
    CPU VCCIO Voltage 1.25v
    CPU System Agent Voltage 1.29v
    Dram timing control 17-18-18-38
    Mode1
    Dram command rate set to 2N set dram current capability to 130%

  7. #27
    ROG Guru: Green Belt Array Phillyflyer's Avatar
    Join Date
    Mar 2012
    Reputation
    30
    Posts
    536

    Quote Originally Posted by SK8 View Post
    So do I it just passed the first hr @ 1442% no errors I think my brain needs a rest from this today and go play some BFV tonight, I will look at your settings tomorrow if my brain is not feeling on overload or in the next few days for sure. Thank you both for all the help.
    Personally don't think your ram is the issue....most likely the IMC is not as strong as one would like...tweaking the memory will most likely work
    Asus ROG Maximus XI EXTREME
    Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
    XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
    Swiftech Drive II / Swiftech MCP35X Pump
    Enermax Platimax 1200 Watt Power Supply
    32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
    MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
    (5)Samsung 840 Pro 128 GB In Raid 0
    (2) WD 1TB Black Edition
    Corsair 900 D

  8. #28
    ROG Guru: Yellow Belt Array SK8 PC Specs
    SK8 PC Specs
    MotherboardMaximus XI Extreme
    ProcessorIntel I9 - 9900K
    Memory (part number)DDR4 G.Skill Trident Z RGB 4266Mhz 32GB F4-4266C17Q-32GTZR
    Graphics Card #1ROG Strix OC 2080Ti
    MonitorSamsung 49" CHG90 QLED Gaming Monitor 144Hrz 1ms
    Storage #1Samsung 850 Pro X-Three-1TB
    CPU CoolerHydro Series H150i Pro RGB 360mm Liquid CPU Cooler
    CaseCorsair Obsidian Series 1000D
    Power SupplyCorsair HX 1200i
    Keyboard Corsair K70
    Mouse Corsair Sabre
    Headset Sennheiser Game Zero Headset
    Mouse Pad Corsair MM800 RGB POLARIS
    Headset/Speakers Sennheiser GSX 1000 Audio Amplifier
    OS Win 10 Enterprise 64bit
    Accessory #1 Logitech G13 handpad
    SK8's Avatar
    Join Date
    Jan 2016
    Reputation
    10
    Posts
    140

    Quote Originally Posted by Phillyflyer View Post
    Personally don't think your ram is the issue....most likely the IMC is not as strong as one would like...tweaking the memory will most likely work
    You would think or I would a i9-9900k would be but ya you never know :/ I hope I can get it to 4266
    Bios 602
    passed 8hr test on Karhu RamTest
    Set to Manual OC
    Dram Frequency 4266MHz
    Dram voltage 1.45v
    CPU VCCIO Voltage 1.25v
    CPU System Agent Voltage 1.29v
    Dram timing control 17-18-18-38
    Mode1
    Dram command rate set to 2N set dram current capability to 130%

  9. #29
    ROG Guru: Yellow Belt Array SK8 PC Specs
    SK8 PC Specs
    MotherboardMaximus XI Extreme
    ProcessorIntel I9 - 9900K
    Memory (part number)DDR4 G.Skill Trident Z RGB 4266Mhz 32GB F4-4266C17Q-32GTZR
    Graphics Card #1ROG Strix OC 2080Ti
    MonitorSamsung 49" CHG90 QLED Gaming Monitor 144Hrz 1ms
    Storage #1Samsung 850 Pro X-Three-1TB
    CPU CoolerHydro Series H150i Pro RGB 360mm Liquid CPU Cooler
    CaseCorsair Obsidian Series 1000D
    Power SupplyCorsair HX 1200i
    Keyboard Corsair K70
    Mouse Corsair Sabre
    Headset Sennheiser Game Zero Headset
    Mouse Pad Corsair MM800 RGB POLARIS
    Headset/Speakers Sennheiser GSX 1000 Audio Amplifier
    OS Win 10 Enterprise 64bit
    Accessory #1 Logitech G13 handpad
    SK8's Avatar
    Join Date
    Jan 2016
    Reputation
    10
    Posts
    140

    OK @PhillyFlyer trying this made it to desktop now testing ram with Karhu RamTest fingers crossed Dang 13 min in test got error :/

    XMP1 and on 4266MHz
    Ram voltage is set to 1.45 v
    Dram voltage is set to 1.25v
    CPU system Agent is set to 1.25v
    In DRam timing control its on Maximus tweek 1
    ram timings set to 18-18-18-38
    Dram command rate set to 2N
    Last edited by SK8; 03-18-2019 at 03:08 PM.
    Bios 602
    passed 8hr test on Karhu RamTest
    Set to Manual OC
    Dram Frequency 4266MHz
    Dram voltage 1.45v
    CPU VCCIO Voltage 1.25v
    CPU System Agent Voltage 1.29v
    Dram timing control 17-18-18-38
    Mode1
    Dram command rate set to 2N set dram current capability to 130%

  10. #30
    ROG Guru: Green Belt Array Phillyflyer's Avatar
    Join Date
    Mar 2012
    Reputation
    30
    Posts
    536

    Quote Originally Posted by SK8 View Post
    OK @PhillyFlyer trying this made it to desktop now testing ram with Karhu RamTest fingers crossed

    XMP1 and on 4266MHz
    Ram voltage is set to 1.45 v
    Dram voltage is set to 1.25v
    CPU system Agent is set to 1.25v
    In DRam timing control its on Maximus tweek 1
    ram timings set to 18-18-18-38
    Dram command rate set to 2N
    Please post back with results
    Asus ROG Maximus XI EXTREME
    Intel i7 9900K OC'D @ 5.2 GHZ @ 1.345V (1.296V LOAD) LLC 6 PRIME 95 STABLE 8 HRS
    XSPC RX360 Rad (6)Scythe Gentle Typhoon 1850 RPM Fans In Push/Pull @ 1500 RPMS
    Swiftech Drive II / Swiftech MCP35X Pump
    Enermax Platimax 1200 Watt Power Supply
    32GB G.Skill F4-3866C18Q-32GTZR 3866 MHZ CL18 1.35V (OC 4266MHZ 17-18-18-41-2T @1.45V)
    MSI GTX 1070 SEA HAWK EK X SLI WITH ASUS HB RGB
    (5)Samsung 840 Pro 128 GB In Raid 0
    (2) WD 1TB Black Edition
    Corsair 900 D

Page 3 of 14 FirstFirst 1 2 3 4 5 13 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •