Maximus XI Extreme need help with bios

[Phillyflyer]

Failed @ 1hr 45min

Try lowering the SA to 1.275v.....If it still fails...will try setting manual vs XMP

[SK8]

ok going to test.....

This is what I set ...

IO 1.325v and SA 1.275v , XMP1 and on 4266MHz, ram timings set to 17-18-18-38
Dram command rate set to 2N set dram current capability to 130%

[Phillyflyer]

Didn't think u were going 17-18-18-38-2N ??
Like to stay at 18-18-18-38-2N first..get that at least stable.

[SK8]

Ok will go back in bios and change it as it just gave a error 1hr 29min in. My bad sorry going to test it again

[SK8]

New record lol 2hr 31min in error
with settings ....

XMP1 4266MHz
Dram voltage 1.45
CPU VCCIO Voltage 1.325v
CPU System Agent Voltage 1.275v
Dram timing control 18-18-18-38
Mode 1
Dram command rate set to 2N set dram current capability to 130%

[Phillyflyer]

New record lol 2hr 31min in error
with settings ....

XMP1 4266MHz
Dram voltage 1.45
CPU VCCIO Voltage 1.325v
CPU System Agent Voltage 1.275v
Dram timing control 17-18-18-38
Mode 1
Dram command rate set to 2N set dram current capability to 130%

Progress !!!
Lower SA voltage to 1.265v.....if that becomes stable for longer than 2.5 hours...may look at adjusting down IO voltage..
Seems that was fairly stable with CL 17

[SK8]

That 17 in timing was to be a 18 I just fixed it lol typo yes progress :] ok redoing all bios settings as I cant seem to just change my volts I have to reset everything and start over not a bad thing just is lol

EDIT .. No the 17 timing gave a error at 1hr 29min it was Dram timing control 18-18-18-38 to make it 2hr and 31 min until error

Little Mrs did a typo lol

[SK8]

OK done and testing...

XMP1 4266MHz
Dram voltage 1.45
CPU VCCIO Voltage 1.325v
CPU System Agent Voltage 1.265v
Dram timing control 18-18-18-38
Mode 1
Dram command rate set to 2N set dram current capability to 130%

[Phillyflyer]

That 17 in timing was to be a 18 I just fixed it lol typo yes progress :] ok redoing all bios settings as I cant seem to just change my volts I have to reset everything and start over not a bad thing just is lol

You should be able to make a simple change to voltages without resetting anything...try putting the cursor on the voltages you wish to change and hit the backspace button until the block is clear....then input new voltage...save and reboot

[SK8]

You should be able to make a simple change to voltages without resetting anything...try putting the cursor on the voltages you wish to change and hit the backspace button until the block is clear....then input new voltage...save and reboot

I did try this on old bios 805 did not work no idea why, next time in bios I will try again on this bios. BTW I am way more happy on the old bios 602 seems way more stable to me. Now I can see why you stayed with it.