I'm about to swap my Strix cooler for Raijintek Morpheus II Core Edition and faced an issue. PCB has 6-pin fan connector and I have VGA 4-pin PWM adapter like this: https://gelidsolutions.com/thermal-s...m-fan-adaptor/ which swaps basic PWM connector to 4-pin VGA fan connector. It's obvious that it wont fit but can anyone tell me what are the pins on the PCB so I can make my own cable? Where to connect black, red, yellow and blue in the 6-pin connector on PCB?

Stock fan cable has red, two green, yellow, blue and black wires. All yellows go to same pin just like blue and black ones. Red and green ones goes to separate pins.