Internal Parity Whea Logger 19 - Metro Exodus - 9900K 5ghz

[lpiotrowski211]

What is cpu current capability ? I put 170%. It is any stability improvement or left on auto?

[lpiotrowski211]

For example: Using level6. Manual Voltage: 1.310. Windows/light load : 1.296-1.305. Realbench 1.305-1.314v


Level 7: Manual Voltage: UEFI: 1.260V. On idle/low load 1.260-1.296v. Realbench 1.305V in test.


level 5 . Manual entered in uefi : 1.360V. Idle 1.350v/or BF5 load : 1.323-1.340V , load ( AVX ) 1.314v stable.



Like you see its something messed i confused which to use? Also i get 1 whea parity error once when playing metro using level6 mentioned above.


All other settings:
Sync Core 50
Ia/dc load line: both to 0.01
cpu core / cache limit : max 255
cpu current capability 170%
all power limit maxed
MCE Disabled


Bios is update to newest. Thx

[Jane Doe]

I vote for your last example. Keep that with lvl 5. So you disabled MCE? What are readings from hwinfo for clock speed when you test avx? 5000Mhz or 4700Mhz? I always use MCE enabled to keep my cores on full clock.

These value I'm keeping on deafult:
Ia/dc load line: both to 0.01
cpu core / cache limit : max 255
cpu current capability 170%
all power limit maxed

[lpiotrowski211]

Ok get today 1 whea when LLC5 1.365v bios, load 1.314avx realbench

Back to llc6 1.330v bios,realbench 1.323 - 1.332v ,its ok now. So i keep it ok?

[Jane Doe]

Yes you can continue with little higher voltage, rise about 0.005 until realbench no whea and keep lvl5 or lvl6. if problems continue try using 4.9Ghz and make stable voltage for that clock.