Hello Everyone,* I have a big Problem with the 2 Coolers in the Headskin of the VRM Cooler on the Zenith Extreme Alpha Motherboard, there spinning like crazy and very loud on full speed. In the Bios >> Monitor .. the HS Fan Speed shows around 13.000 rpm, I tried to change in silent mode over Q-Fan Configuration, still the same no changes, I changed the Heatskin Fan Q-Fan Controll to PWM Mode and set the Duty Cycle % all to 0 to see what happens, one of the fans stopped spinning and the other one still spins full speed, this must be a bug in the Bios, because I connected the HS Fan to the Fan Extension Card II that was included with the Motherboard and in the Set the Extension Fan 5 Q-Fan Control to DC Mode with Manual there I have the option "Allow Fan Stop" and both Fan stops and set it up to 60%/60° 70%/65° 100%/75°, that way the HS Fan is quite run some benchmarks like 3D Mark, Cinebench, very stable.* I was a Mac User changed after 15 years to a PC maybe I do something wrong in the UEFI Bios Settings or the Motherboard or the Bios are broken.* Need some help please wo make it work probably it should be, HS FAN on the Motherboard HS FAN Connector.
Bios Version 0207
*
Best Regards,
Watashiwa*