Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Rampage VI Corsair DOMINATOR needs 1.42 V to be stable

KOGE19
Level 8

‎03-19-2019 03:16 AM - last edited on ‎03-06-2024 08:26 PM by Community Admin

Hello All,

I am back on here again with my issues :o. So I bought a delidded 7900x and a Gigabyte board recently on fleabay. The gigabyte board got bricked when I tried to change the BIOS on on chip and then, well, its gone for an RMA. I bought a RVIE from amazon(Amazon Warehouse - used nearly new).

My issue: Currently, I need to set 1.42V on my corsair dominator 3000 MHz 64GB with SA and VCCIO all set in auto. The more voltage I supply to the RAM the more stable it seems on Intel Burn Test. Please be aware that I was using these RAM chips on my Rampage V Extreme with 5960x which seemed to suffer from IMC degrdation. Is my memory failing or is it the IMC in the 7900x and 5960x which is degrading?

The DOMINATOR is XMP rated at 15-17-17-35-1T at 1.35 V

Thanks,
G.
0 Kudos
2,013 Views
10 REPLIES 10

Arne_Saknussemm
Level 40

‎03-19-2019 07:26 AM

Oh not you again LOL 😮

Eh? remind me exactly what RAM...I had hyper x in my head...single kit I presume?

What is the board setting for VCCSA
ARNE’S GUIDE TO PC BUILDING HAPPINESS

ARNE'S GUIDE TO OVERCLOCKING HAPPINESS
0 Kudos

KOGE19
Level 8
In response to Arne_Saknussemm

‎03-20-2019 06:49 AM

Arne Saknussemm wrote:
Oh not you again LOL 😮

Eh? remind me exactly what RAM...I had hyper x in my head...single kit I presume?

What is the board setting for VCCSA


Hello Arne,

VCCSA is in auto.

This is a Corsair Dominator 3000 MHz 64 GB as a single kit. Yes.

Thanks,
G.
0 Kudos

Arne_Saknussemm
Level 40

‎03-20-2019 06:57 AM

OK, but when you go into BIOS, what is the reading for VCCSA...the actual voltage the board is setting...you could try tuning that a bit

What vintage is the kit...I ask because kits are tailored somewhat to the platform they came out with...
ARNE’S GUIDE TO PC BUILDING HAPPINESS

ARNE'S GUIDE TO OVERCLOCKING HAPPINESS
0 Kudos

KOGE19
Level 8
In response to Arne_Saknussemm

‎03-20-2019 11:11 AM

Arne Saknussemm wrote:
OK, but when you go into BIOS, what is the reading for VCCSA...the actual voltage the board is setting...you could try tuning that a bit

What vintage is the kit...I ask because kits are tailored somewhat to the platform they came out with...


The kit was bought at the time of my 5960x (you know that story) , though it is on the QVL for the Ramage vi Extreme.
0 Kudos

GhostWorks
Level 9
In response to KOGE19

‎04-01-2019 02:36 AM

not upped the Voltage as off yet, my CPU seems slow on benchmark as well as using windows

79779
Corsair 900D
0 Kudos

GhostWorks
Level 9
In response to KOGE19

‎04-01-2019 02:41 AM

79780
Corsair 900D
0 Kudos

KOGE19
Level 8
In response to GhostWorks

‎04-03-2019 01:46 AM

GhostWorks wrote:
79780


My version of the RAM is v 5.19. It was a warranty replacement from corsair, though personally I dont think that my old set (which was 4.19) had any issues.
0 Kudos

GhostWorks
Level 9
In response to KOGE19

‎04-11-2019 11:51 PM

KOGE19 wrote:
My version of the RAM is v 5.19. It was a warranty replacement from corsair, though personally I dont think that my old set (which was 4.19) had any issues.


Thanks good to know
Corsair 900D
0 Kudos

GhostWorks
Level 9

‎04-01-2019 02:35 AM

I also have the 64Gb kit 3000 on my Rampage VI extreme , XMP enabled Userbenchmark says its running good (3000)

UserBenchmarks: Game 99%, Desk 164%, Work 161%
CPU: Intel Core i9-9900X - 93%
GPU: Nvidia RTX 2080 - 88.1%
SSD: Samsung 970 Evo Plus NVMe PCIe M.2 1TB - 283.1%
SSD: Samsung 970 Evo NVMe PCIe M.2 500GB - 529.2%
SSD: Nvme INTEL SSDPED1D28 280GB - 431.8%
USB: Samsung Flash Drive 128GB - 85.2%
RAM: Corsair Dominator DDR4 3000 C15 4x16GB - 117.4%
MBD: Asus ROG RAMPAGE VI EXTREME
Corsair 900D
0 Kudos