Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    Apr 2014
    Reputation
    10
    Posts
    14

    Aquantia AQC-107 10G v2.1.17

    The windows 10 64 driver for the 10G NIC on the board doesn't seem to work properly.

    Using the v2.1.17 driver from their website I cannot print anything on my printer! Weird...

    I can print OK with the 1.40.42.0 driver which Windows 10 automatically used on installation.

  2. #2
    ROG Guru: Yellow Belt Array CharlieH PC Specs
    CharlieH PC Specs
    Laptop (Model)MSI GT75 TITAN-094
    MotherboardAsus Dominus Extreme
    ProcessorIntel Xeon W-3175X
    Memory (part number)128GB G.SKILL TridentZ F4-3466C16Q2-128GTZR
    Graphics Card #1ASUS ROG Strix GeForce RTX 2080 Ti ROG-STRIX-RTX2080TI-O11G-GAMING
    Graphics Card #2ASUS ROG Strix GeForce RTX 2080 Ti ROG-STRIX-RTX2080TI-O11G-GAMING
    MonitorHP LP 3065
    Storage #12x 1TB Samsung 970 PRO PCIe NVMe SSD VROC Raid 0
    Storage #22x Intel Optane SSD 900P VROC Raid 0
    CPU CoolerEK-Velocity WS - Narrow ILM
    CaseHighSpeed PC Top Desk Tech Station - HPTX
    Power SupplyCorsair AXi Series, AX1500i and AX1200i
    OS Windows 10 Pro
    Network RouterNetgear XS712T and Asus ROG Rapture GT-AX11000
    Accessory #1 ASUS ROG GeForce RTX Nvlink Bridge with Aura Sync RGB 4 Slot Graphic Cards ROG-NVLINK-4
    Accessory #2 EK-VRM ASUS ROG Dominus Extreme
    Accessory #3 2x HEATKILLER® IV for ASUS RTX 2080 Ti STRIX - ACRYL
    CharlieH's Avatar
    Join Date
    Oct 2017
    Reputation
    10
    Posts
    221

    I am running 2.1.17. I had to go to the Device Manager and access the 'Advanced' settings tab for the adapter and disable 'Recv Segment Coalescing (IPv4)'. My issue wasn't printing but it was adapter performance which was basically 0 upload speed under certain scenarios. Something to try.

  3. #3
    ROG Member Array
    Join Date
    Apr 2014
    Reputation
    10
    Posts
    14

    I have managed to fix the no printing problem I've had with the 1704 BIOS, by updating the ME firmware to v11.11.60.1561 using the ME Update Tool available in the Bios & Firmware section for the motherboard.

    Previously I had 1704 BIOS with ME firmware v11.10.0.1287, which left me unable to print.

    I emailed Aquatia about the issue and they wanted a little more information.

    They suggested that i "try to disable LSO, LRO and checksum offload on 2.1.17.0 driver" but there was no need to. It works now the ME firmware is updated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •