Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12
  1. #11
    ROG Enthusiast Array aaraujo PC Specs
    aaraujo PC Specs
    MotherboardASUS ROG STRIX X470-I GAMING
    ProcessorAMD Ryzen 7 2700X
    Memory (part number)G.SKILL F4-4400C19D-16GTZSW
    Graphics Card #1PALIT GeForce GTX 1050 Ti KalmX
    Storage #1Samsung SSD 970 Pro 512GB
    CPU CoolerNoctua NH-D14
    CaseLian Li PC-Q33
    Power SupplySeasonic SSR-600TL
    Keyboard Logitech K310
    Mouse Logitech M105
    Mouse Pad ASUS ROG Whetstone
    OS Microsoft Windows 10 64bit

    Join Date
    Dec 2015
    Reputation
    10
    Posts
    39

    It is OK to press "Y" as long as you are flashing the correct file for your motherboard. And the BIOS version you are flashing supports your CPU. I have been at 2008 and flashed back to 1201 using this method. I had to press "Y" and ENTER to proceed with the flash. That question is normal. There is something on 2008 that prevents flashing to a previous BIOS version. Probably support for upcoming CPUs.

  2. #12
    ROG Member Array
    Join Date
    Dec 2018
    Reputation
    10
    Posts
    8

    All right, I finally fixed my problem!
    I reverted to BIOS 1201, thanks a lot aaraujo for your help!
    Turns out that didn't actually fix the problem.

    I cannot exactly pin point what caused the issue, but it looks like it might have been related to one of those 2 things:
    • My CPU fan isn't connected direclty to the motherboard (it's managed by the case).
      That means with the default BIOS settings, the motherboard won't boot and forces me to disable the CPU fan monitoring in the BIOS, after pressing F1.
    • My system is configured with an NVMe RAID Array


    It looks like if I don't set the SVM Mode before setting up both the RAID array and disabling CPU Fan monitoring, then I can't set it up later... (although this isn't 100% proof)

    Switching back to version 2008, I was still able to enable SVM Mode, after a few tries.
    But after using version 2008 for a few days, I get regular crashes, which make the PC completely frozen, and even holding the power button for 20s doesn't stop it! Never seen that before, I must say... I actually have to switch the PSU off to unfreeze the PC.

    So, long story short, I'm back to version 1201... Anyone had similar freeze issues with the 2008 BIOS?
    Last edited by nico35; 04-15-2019 at 12:12 AM.

Page 2 of 2 FirstFirst 1 2

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •