Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Sep 2020
    Reputation
    10
    Posts
    1

    Only 100Mbps on Rampage III Extreme

    Hey*
    I switched from a Asus P6T Deluxe V2 to an Asus Rampage III Extreme
    Now i have a Problem.. befor switching i got 1Gbps on the P6T but on the Rampage III Extreme i get only 100Mbps Same cable everything is same.
    And if i change it to 1Gbps Full Duplex the Control Center says no cable connected and if i go back on Auto he picks 100Mbps and its working.


    Thank you *

  2. #2
    New ROGer Array
    Join Date
    Sep 2018
    Reputation
    11
    Posts
    7

    Would double check all connections & cables - gigabit speeds are only reachable on 4 twisted pairs properly connected (so all 8 wires) - if even 1 wire connection is spotty, connection falls back to 100mbps which can be reached on 2 twisted pairs (4 wires)

    Could be that during/after your upgrade activities, one of the wires in one of the connectors got "dislodged". this will be far more likely than a driver issue. Maybe try with a laptop on the same cable to doublecheck

    Of course, if you only ever get 100mbps no matter the cable or ports/devices you are plugging it in to, the board could also be at fault, RMA needed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •