©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

emaratee · ‎02-20-2012

I don't seem to be able to get over this issue,

My RAID-0 will always fail after every BIOS update ... and yes, i do set the SATA to RAID after the first most restart .. still ends up with a failed array ...

My SSDs are Crucial M4 - 120GB

8_Pack · ‎02-20-2012

That is really strange I have two Raid 0 arrays on the Intel controller and both are fine after every Bios flash.

http://www.hwbot.org/user/8_pack/
The GB Bencher. http://www.team-greatbritain.com/team-gb-members/

DooRules · ‎02-20-2012

After the flash, do you hit optimized system defaluts when you first get in bios or do you go straight for raid?

7980XE on Asus ApexVI
Zotac 2080Ti
Intel 900P
2 x Samsung 950 Pro
EVGA 1600W
Alienware 34"
Samsung 28" 4K

emaratee · ‎02-20-2012

Tks for the reply guys, and yes I go straight for raid ... there is not issue with HDD

DooRules · ‎02-20-2012

I have used two M4's as well, only thing I do different is as soon as I enter bios after flash I load defaults and then turn on raid.

7980XE on Asus ApexVI
Zotac 2080Ti
Intel 900P
2 x Samsung 950 Pro
EVGA 1600W
Alienware 34"
Samsung 28" 4K

emaratee · ‎02-20-2012

is it to do with CPU level up and the sequence it takes !! even though am always hitting the bios right before it initiate the intel raid controller !!

cool_recep · ‎05-23-2012

If your data was lost after the BIOS update, you can use this guid to recover your data:

http://www.technopat.net/forum/ssd-flash-ve-sabit-diskler/4777-solved-raid-0-failed-after-bios-updat...

Why RAID-0 fails after BIOS Flash !!