Results 1 to 3 of 3

Threaded View

  1. #1
    New ROGer Array
    Join Date
    May 2019

    Question Boot issues after enabling XMP - Maximus X Code

    Hi, ROG people!

    I upgraded my system last year to the following specs:
    • Maximus X Code
    • i7-8700K
    • 2 x 16 GB Corsair Vengeance LPX DDR4 3200 C16 for Intel 100 Series
    • Samsung 970EVO (PCIE mode)

    I didn't bother to fine tune it in the first place so my RAM worked at generic 2133 MHz. Boot time was under 10 seconds.

    Recently I started feeling greed :P for not having it working on declared 3200 MHz so I went to BIOS and enabled XMP profile. It correctly set the frequency, timings and voltage. After restart, it took a while for the ROG logo to appear. Went pretty quickly after.
    Another time after fresh start, it rebooted on its own and when Windows login screen appeared thereafter, it gave me BSOD and Memory Management error.
    In some cases, it boots up as quickly as before.

    Please advise kindly.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts