Results 1 to 3 of 3
  1. #1
    New ROGer Array wi87zard PC Specs
    wi87zard PC Specs
    MotherboardMaximus X Formula
    ProcessorCore i7 8700k
    Memory (part number)8Gb * 4gb
    Graphics Card #1GTX 1070TI
    OS Windows 10 64bit

    Join Date
    Aug 2018
    Reputation
    10
    Posts
    2

    Impedancia en Maximus X

    Hello community I need your help, a few days after formatting my PC and install all its drivers I find this problem if I should call.

    Amplification detection
    The impedance of the rear line output is equal to or greater than 110 ohms. The amplification level has been set to extreme.

    I leave an image of what I get.
    Click image for larger version. 

Name:	Screenshot_1.jpg 
Views:	0 
Size:	78.4 KB 
ID:	80371

    Install (UAD or HDA) without any solution.

    Thank you very much and I hope for your help.

  2. #2
    ROG Guru: Yellow Belt Array Guitarmageddon888 PC Specs
    Guitarmageddon888 PC Specs
    MotherboardMaximus x code bios1704
    Memory (part number)8700k 5.1/4.9avx
    Graphics Card #1MSI 2080 gaming trio
    MonitorHP Omen 27"
    Storage #1Samsung 970 m.2
    Storage #2Samsung 860 evo
    CPU CoolerH150i
    CaseLian li pc011
    Power SupplyEvga supernova g3 850w
    Keyboard Corsair k70
    OS Windows 10

    Join Date
    Nov 2018
    Reputation
    12
    Posts
    184

    What are you connecting to it? Is this really a "problem" or more just general information? When I connect my 300 ohm headphones it does the same (via the UAD driver and realtek control panel). I'm not sure if there is a way to bypass the omboard amp auto setting that stuff.

  3. #3
    New ROGer Array wi87zard PC Specs
    wi87zard PC Specs
    MotherboardMaximus X Formula
    ProcessorCore i7 8700k
    Memory (part number)8Gb * 4gb
    Graphics Card #1GTX 1070TI
    OS Windows 10 64bit

    Join Date
    Aug 2018
    Reputation
    10
    Posts
    2

    Quote Originally Posted by Guitarmageddon888 View Post
    What are you connecting to it? Is this really a "problem" or more just general information? When I connect my 300 ohm headphones it does the same (via the UAD driver and realtek control panel). I'm not sure if there is a way to bypass the omboard amp auto setting that stuff.
    Thank you for responding, what happens is that I have a 5.1 sound is a branded flash and I have a asus strix 7.1 (USB) headphones. I say problem because the computer crashed for about 3 or 4 seconds. and this message comes out, and I do not know how to correct so that this message does not come out and omit the crasheo.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •