©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

sandrino71 · ‎06-08-2019

Hi have a problem for setting my gskill 3600 at 3600 or 3200 mhz.
I search online & i try more setting, but I think I'm wrong.
My cpu it's ryzen 2700x not overclock.
I want only the ram go at 3200 or 3600.
Thanks

amadeus1171 · ‎06-08-2019

I wrote up a whole section but I got that "Permission Denied" bug and lost it all.

I need more details.

How are you setting the ram to 3200/3600? Did you simply set the speed or are you using D.C.O.P.? Did you fiddle with the voltages?

sandrino71 · ‎06-11-2019

amadeus1171 wrote:
I wrote up a whole section but I got that "Permission Denied" bug and lost it all.

I need more details.

How are you setting the ram to 3200/3600? Did you simply set the speed or are you using D.C.O.P.? Did you fiddle with the voltages?

I have setting with dcop but i see only 3600 profile & the ram don't' work.
I try with manual setting but not work....sure i use wrong setting in mb.

amadeus1171 · ‎06-11-2019

I have this ram.

How I got it to work is that I undervolted the CPU using the (-) offeset. I started with (-).1 and went up (down) from there.
Once the CPU was stable, I set the D.O.C.P. then increased the s.o.c. voltage offset (+) and core voltage offset till the system became stable. I used the bootable MemTest86 to test the memory.

sandrino71 · ‎06-11-2019

friend, if I tell you what bull**** I did you don't believe it !!!
I put the ram on slots 1-3 instead not into slot 2-4.
Now everything works well. Luckily I mounted a new hard disk and realized the error. Thanks a lot anyway for the help.

CROSSHAIR VII & ram problem.