02-22-2012 06:10 AM - last edited on 03-06-2024 09:40 PM by ROGBot
02-22-2012 06:14 AM
02-22-2012 06:15 AM
02-22-2012 06:23 AM
02-22-2012 07:09 AM
02-22-2012 07:38 AM
02-22-2012 10:25 AM
02-22-2012 05:31 PM
02-23-2012 02:28 AM
InnervateD wrote:
With the H100, I had some issues with the screws and the mounting plate which is the stock intel bracket with the R4E board using the LGA2011 mount. It didn't go in flush or with ease. I had to bend the 4 mounting clips inwards a bit with some heavy pliers with a cloth so I didn't chip any paint on the clips. Then I had to loosen all 4x H100 mounting screws on the board that the H100 will mount onto, even then I had for apply a bit of force just to get it in and then screw in the thumbscrews that go over the mounting screws which were already loose so there's some play room to get it in and on right. It went in fine once I did the above. A lot of people on the Corsair form had some issues with the mounting of the H100 has the brackets aren't flush on most builds. Some people had Zero issues some had to force it in, some had to do all the above I did to get it to fit.
02-23-2012 11:06 PM