Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

problem code 00

D7m159
Level 7

‎06-29-2019 06:48 PM - last edited on ‎03-06-2024 08:07 PM by Community Admin

I have a problem with the motherboard Asus ROG X470 hero 2 when I turn off the pc then show me code 00 does not stop the operation, although the motherboard is new and replaced by the same motherboard, but it shows me the same problem I installed the processor on a motherboard owned by my friend and it appeared to me that the processor works
0 Kudos
1,278 Views
1 REPLY 1

MeanMachine
Level 13

‎06-30-2019 03:32 AM

QCODE 00 is a hardware error and not necessarily a CPU error. It has also been found to be due to DIMMs training/failing or poor cabling conditions. In fact I have seen many posts determining it to be PSU, GPU, DISK or poor cabling and connections. Even updating Bios has fixed the issue. As POST will not advance till the error is fixed and If it persists then you will have to disassemble the system and breadboard as the error could be related to Standoffs shorting or internal cabling.

Start with just the MB and PSU connected then add one component at a time till the culprit is found checking your Qcode at each power up.
We owe our existence to the scum of the earth, Cyanobacteria

My System Specs:

MB:ASUS ROG Crosshair VII Hero/WiFi GPU:EVGA GTX 1080 sc PSU:Corsair AX-1200i
CPU:AMD R7 2700X Cooler: Corsair Hydro H115i Case: Corsair Carbide 780t
Memory:G.Skill TridentZ F4-3200C14D-16GTZR SSD:Samsung 500GB 960 EVO M.2

[/HR]
0 Kudos