Results 1 to 4 of 4
  1. #1
    New ROGer Array rpissardini PC Specs
    rpissardini PC Specs
    MotherboardAsus ROG Maximus Hero XI (WIFI) Z390
    Processori9 9900k @5.0GHz
    Memory (part number)Corsair Vengeance RGB Pro 32GB 3200MHz
    Graphics Card #1EVGA GTX 1070 SC ( Manual OC)
    MonitorTV Samsung 40" Full HD
    CPU CoolerCorsair H150i Pro RGB 360mm
    CaseCorsair Air 540
    Power SupplyCorsair AX860i
    Keyboard Havit KB435L
    Mouse Logitech G403
    Headset Razer Kraken 7.1 V2
    Mouse Pad Corsair MM100
    OS Windows 10 Pro x64
    Network RouterGoogle WIFI

    Join Date
    Apr 2019
    Reputation
    10
    Posts
    11

    Question Maximus Hero XI + i9 9900K

    Hello guys,

    I've been trying to overclock my i9 9900k to run at least 5.0Hz all cores. But I've got a few questions..

    - My system is stable, but I have a few concerns about the CPU voltage.
    In my overclock, I had to set a voltage of 1.310v which seems ok to run all cores at 5.0GHz. However, my voltage on AIDA64 shows a completely different number, it tells me my CPU voltage is about 1.261v. This is way too low compared to the voltage I set in BIOS. I also set the level 7 for LLC.

    I have two questions: Am I running at 1.310 or 1.261 volts? Why I cannot match the same value?

    My CPU temp while full load is 79ºc (maximum of 82ºc).


    My Hardware:
    Asus ROG Maximus Hero XI (WIFI) Z390
    i9 9900k @5.0GHz
    Corsair H150i RGB Pro
    Corsair Vengeance RGB Pro - 16GB
    EVGA GTX 1070 SC (+ manual overclock)
    Corsair AX860i
    SSD Corsair Force LX 128GB (SO)
    2x SSD WD Green 240GB RAID 0
    SSHD Seagate 1TB

  2. #2
    ROG Guru: Blue Belt Array mdzcpa PC Specs
    mdzcpa PC Specs
    MotherboardMaximus Hero XI
    Processor9900k @ 5.1Ghz All Core 1.315v AVX -2
    Memory (part number)Gskill GTZ 4133 C17 32GB (4x8GB)
    Graphics Card #1ROG Strix 2080 TI OC
    Sound CardOn Board
    MonitorROG PG348Q
    Storage #1Samsung 970 Pro M.2 512GB for OS & APPS
    Storage #2Samsung 970 Pro M.2 1TB for GAMES
    CPU CoolerROG Ryujin 360
    CasePhanteks Evolv X
    Power SupplySeasonic Prime 1000W Titanium
    Keyboard Corsair K70 LUX RGB
    Mouse Corsair M65 RGB
    Headset Corsaur VOID Pro
    Mouse Pad Corsair MM300 Wide Desk Mat
    OS WIN 10 Pro
    Network RouterLinksys VELOP
    Accessory #1 ROG 751JY Laptop for Moobile Gaming
    Accessory #2 Koolance EXC-800 Chiller
    Accessory #3 25+ years of overclocking

    Join Date
    Nov 2011
    Reputation
    79
    Posts
    912

    Your voltage is correct. Even on LLC 7, you will see a difference between what you set and what will be reported. The reason has to due with real voltage now being reported on the M11 boards (where it is being measured from). There is a thread on here somewhere about this topic. I will see if I can find it.


    In any event, if you are running stable you're good to go.

  3. #3
    ROG Guru: Blue Belt Array mdzcpa PC Specs
    mdzcpa PC Specs
    MotherboardMaximus Hero XI
    Processor9900k @ 5.1Ghz All Core 1.315v AVX -2
    Memory (part number)Gskill GTZ 4133 C17 32GB (4x8GB)
    Graphics Card #1ROG Strix 2080 TI OC
    Sound CardOn Board
    MonitorROG PG348Q
    Storage #1Samsung 970 Pro M.2 512GB for OS & APPS
    Storage #2Samsung 970 Pro M.2 1TB for GAMES
    CPU CoolerROG Ryujin 360
    CasePhanteks Evolv X
    Power SupplySeasonic Prime 1000W Titanium
    Keyboard Corsair K70 LUX RGB
    Mouse Corsair M65 RGB
    Headset Corsaur VOID Pro
    Mouse Pad Corsair MM300 Wide Desk Mat
    OS WIN 10 Pro
    Network RouterLinksys VELOP
    Accessory #1 ROG 751JY Laptop for Moobile Gaming
    Accessory #2 Koolance EXC-800 Chiller
    Accessory #3 25+ years of overclocking

    Join Date
    Nov 2011
    Reputation
    79
    Posts
    912

    Here's the thread I was referring to:
    https://www.overclock.net/forum/2768...HNI3wgR-kN5qpc

  4. #4
    New ROGer Array rpissardini PC Specs
    rpissardini PC Specs
    MotherboardAsus ROG Maximus Hero XI (WIFI) Z390
    Processori9 9900k @5.0GHz
    Memory (part number)Corsair Vengeance RGB Pro 32GB 3200MHz
    Graphics Card #1EVGA GTX 1070 SC ( Manual OC)
    MonitorTV Samsung 40" Full HD
    CPU CoolerCorsair H150i Pro RGB 360mm
    CaseCorsair Air 540
    Power SupplyCorsair AX860i
    Keyboard Havit KB435L
    Mouse Logitech G403
    Headset Razer Kraken 7.1 V2
    Mouse Pad Corsair MM100
    OS Windows 10 Pro x64
    Network RouterGoogle WIFI

    Join Date
    Apr 2019
    Reputation
    10
    Posts
    11

    Quote Originally Posted by mdzcpa View Post
    Your voltage is correct. Even on LLC 7, you will see a difference between what you set and what will be reported. The reason has to due with real voltage now being reported on the M11 boards (where it is being measured from). There is a thread on here somewhere about this topic. I will see if I can find it.


    In any event, if you are running stable you're good to go.
    Thank you!!

    Should I reduce the LLC to 6, maybe 5 or maintain at 7?

    EDIT: Thanks for sending the link

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •