07-10-2019 07:44 AM - last edited on 03-06-2024 08:01 PM by ROGBot
07-10-2019 09:16 AM
07-10-2019 09:26 AM
Rockford wrote:
Its like saying, is the earth too round?
that's normal timings for memory kits in that XMP frequency range
if it feels good for you, and everything is working great.... go for it
its always going to be people in here claming that 9-27-4-21-0T would be better, so
listen to your heart not to others.......
07-10-2019 09:28 AM
07-11-2019 04:48 AM
07-12-2019 12:44 AM
feedmeink wrote:
You should be able to do 1t timings. I would keep your old setting but put to 1t and see how it goes. If it doesnt pass try bumping voltage to 1.38. Have you adjusted any secondary timings?
07-12-2019 03:37 AM
07-12-2019 04:17 AM
07-12-2019 05:23 AM
feedmeink wrote:
1t is faster but realistically you wont see a large difference. It might not work due to the processor or some odd secondary timings that the board sets on it's own. If you aren't familiar with secondary timings, might as well leave at current stable settings.
Nate152 wrote:
Hi pegadroid
In the bios on the AI Tweaker page try setting:
Dram Frequency - 3000MHz
Dram voltage 1.40v - 1.45v
CPU VCCIO voltage - 1.25v
CPU System Agent voltage - 1.25v
Primary timings: 15-15-15-35-2T
If it boots and is stable try 1T, it should be able to do it.
I have the Maximus IX code and 7700k, with G.Skill Trident Z I can boot at 4000MHz with 15-15-15-36-2T timings but is not fully stable, have settled on 4000MHz 19-19-19-39-2T.
I have Dram voltage at 1.55v, these are Samsung B-Die which can handle up to 1.80v.
CPU System Agent voltage = VCCSA - 1.320v
CPU VCCIO voltage - 1.31v
07-12-2019 06:03 AM