HELP RAM TIMING 3000MHz

[pegadroid]

All right

I don't fool with the secondary timings, I let those all on auto and set only the primary timings and command rate.

Try raising the Dram voltage to 1.40v, if it doesn't boot try Dram voltage at 1.45v.

If that doesn't work set:

Dram Frequency - 3000MHz
Dram voltage 1.45v
CPU VCCIO voltage - 1.275v
CPU System Agent voltage - 1.30v

Primary timings: 15-15-15-35-1T.

1T as you can tell is putting more strain on the cpu's IMC so you either need to stick with 2T or up the voltages or loosen timings to get 1T stable.

3000 15-15-15-35 1T , 1.450. vccio 1.275 sa 1.30 = cant boots 😭

[Nate152]

All right

I don't think I'd push it any harder on voltages to get 1T stable.

The next thing to try is loosening primary timings to 16-16-16-36 - 1T or stick with your original settings with 2T.

[pegadroid]

All right

I don't think I'd push it any harder on voltages to get 1T stable.

The next thing to try is loosening primary timings to 16-16-16-36 - 1T or stick with your original settings with 2T.

same can't boots, i try 2 timing, 16-16-16-36 and 16-18-18-36 (original xmp 3466)

[Nate152]

Does your bios have memory OC presets?

Instead of using XMP, try one of the Memory OC Presets if you have the option.

If you have the option, "OC Presets" is listed at or near the top of the AI Tweaker page, click it and it should give you some options.

[pegadroid]

Does your bios have memory OC presets?

Instead of using XMP, try one of the Memory OC Presets if you have the option.

If you have the option, "OC Presets" is listed at or near the top of the AI Tweaker page, click it and it should give you some options.

yes i have only 1 preset xmp, but its 3466, and can't aplly preset because cant boots.

[Nate152]

All right

Lets try the original specs manually instead of using XMP.

Reset Bios to defaults (F5 key).

AI Tweaker - Manual
Dram Frequency - 3466MHz
Dram voltage - 1.40v
CPU VCCIO voltage - 1.25v
CPU System Agent voltage - 1.25v

Primary Timings :

16
18
18
36
2T

F10 and Enter to save and exit.

How does she go?

[pegadroid]

All right

Lets try the original specs manually instead of using XMP.

Reset Bios to defaults (F5 key).

AI Tweaker - Manual
Dram Frequency - 3466MHz
Dram voltage - 1.40v
CPU VCCIO voltage - 1.25v
CPU System Agent voltage - 1.25v

Primary Timings :

16
18
18
36
2T

F10 and Enter to save and exit.

How does she go?

same canot boots 😭

[Nate152]

Ok,

Go back into the bios, keep the same settings as above and select the next slowest Dram Frequency.

F10 and enter.

If it doesn't boot, select the next slowest Dram Frequency again, keep lowering the Dram Frequency until you can boot and let me know what you end up with.

[pegadroid]

Ok,

Go back into the bios, keep the same settings as above and select the next slowest Dram Frequency.

F10 and enter.

If it doesn't boot, select the next slowest Dram Frequency again, keep lowering the Dram Frequency until you can boot and let me know what you end up with.

with 1T can boot at 2533
1T is very important?

[Nate152]

How far does 2T let you get ?

Here's an idea,

I know you paid for 32GB but if you're just gaming, 16GB is plenty and may let you run at the rated specs as 16GB will be lighter on the cpu's IMC. For my board slots A2-B2 are recommended to use.