Latest C7H BIOS

[dehinson]

Auto will work, or choose Gen 3. If you read the specs on your drive it will tell you what Gen it is

OK... Thank you.

[wpalmer]

Updated to 3103 a couple days ago on my C7H (non-wifi) and have had a stable system so far. I run a 25% overclock on my Ryzen 7 1700, just an auto overclock from the board. The only setting I adjust manually is ram voltage from auto to 1.35000 per recommend spec. On past BIOS I've only been able to run a 21% overclock and keep it stable. This update has been good to me so far, though I'll say I have used almost every update for the board and generally have not had many problems.

[mastrboy]

Anyone else getting qcode 8d post errors with bios 3103 (2020/06/23) ?

Going back to 3004 (2019/12/27) solves the issue.

[Frostie36]

Anyone else getting qcode 8d post errors with bios 3103 (2020/06/23) ?

Going back to 3004 (2019/12/27) solves the issue.

Yes I am, had 8d numerous times but 99% of the time hitting reset on my tower case sorts it & the system boots properly, I also noticed my ryzen dram calculator overclock values cause bios post failure where as the dram overclock was 100% stable with the previous bios.

[mastrboy]

Yes I am, had 8d numerous times but 99% of the time hitting reset on my tower case sorts it & the system boots properly, I also noticed my ryzen dram calculator overclock values cause bios post failure where as the dram overclock was 100% stable with the previous bios.

Thanks for confirming the issue, I'll just stay on the previous stable until another update is out.
Hopefully ASUS is aware of it and will fix it soon...

[xeizo]

No problems at all with the 3103 bios, same settings as before, but I run the unofficial Beta that was posted at oveclock.net. I don't think there is any difference though.

[Adiemus]

Right now i have really slow speed my 970 Pro SSD. I can only reach 1500MB/s read , while before I could reach 2700MB/s read.
And yes according to Samsung Magician in running PCIE 3.0 x4.
I have flashed 3101 Bios. Can someone verify if its a problem other then bios?

A bit late to reply but did you install the driver from Samsung? It's under driver and software downloads for the 970 pro (further down the list):
NVMe Driver Version 3.3 (Mehrsprachig)
: Windows 7 / 8 / 8.1 / 10 (32bit, 64bit)
2020-06-11
4.72 Mb

I had the same on my board with 3004 BIOS:

[xeizo]

@Shamino, any chance of getting the 0019 Beta-bios for C7H WiFi ported to "normal" C7H without WiFi?

Sleep issue is reportedly solved, and the new FMax is a killer feature, would like to test those.

[RNG_AGESA]

any news about ZEN3 support on Crosshair VII?

going to replace 3900x with 5900x straight from the start, it would be awesome if i could use it....

[xeizo]

any news about ZEN3 support on Crosshair VII?

going to replace 3900x with 5900x straight from the start, it would be awesome if i could use it....

Yes, C7H is a extreme solid board, it will run 5900X as good as any X570/B550. But it will miss out on some features, like smart access memory, and of course it's PCIE 3.0. Maybe 5-10% slower with the 6-series cards, but in all other regards as good