Latest C7H BIOS

[liakou]

Can i save 8 profiles? USB drive has to be empty before saving?
I hope ASUS will release 1004 BIOS soon, because 3950X needs to be used with 1004 BIOS according to AMD.

You can save as many as you wish. No need for an empty drive. Each profile size is 12kb.
But you need to have the specific profile that you want to save loaded.
So load each profile you want saved one by one, and save(F2) each accordingly.

[Duvar]

Ok thx for the info, my problem was, that my drive was not empty i guess or not correctly formatted...
Will give it a try.

Today the Aorus Gaming 7 Board got AGESA 1004B, where CCX OC and more is avalailable now, i am jealous^^

Edit: I tried to save the profile with F2, but thats for loading up the profile as far i could see.

Edit2:

Ok i now see it, i tried to save with F2, but when i select ok to save it, nothing happens. Drive remains still empty...

Edit 3:

Tested with 2 drives and it will not save them... Hmm whats the problem here?

Edit 4:

Solved the problem. I was just dumb :-)
I thought where you have to write the name of the profile, was a progress bar^^

Edit 5: Worked thx again.

[RNG_AGESA]

1. Version 2901 have some real issue with overheating,
CPU PWM & Q-FAN PWM (CPU & PCH) are ignoring critical temps over 75c, system is going to shut down by its own reaching 95c.

2. there is as well some strange read-out trouble with HWiNFO, CPU Socket Temp is jumping between 127c and 255c for some seconds once an hour, fans are going crazy.

My system RM650, 3900x, 2070s, CH VII

[DeeGeeFi]

1. Version 2901 have some real issue with overheating,
CPU PWM & Q-FAN PWM (CPU & PCH) are ignoring critical temps over 75c, system is going to shut down by its own reaching 95c.

2. there is as well some strange read-out trouble with HWiNFO, CPU Socket Temp is jumping between 127c and 255c for some seconds once an hour, fans are going crazy.

My system RM650, 3900x, 2070s, CH VII

The bug that reading the ASUS WMI sensors on HWiNFO causes them to bug out and freeze hasn't still been fixed? I have them disabled on HWiNFO, just because of this. Having Folding@Home running with CPU fans staying on idle speeds will cause severe overheating (temperature protection will trip, eventually...) even on Noctua NH-D15...

[ASKnASK]

I updated to 2901 yesterday and have been facing an issue.

From a cold boot, the system takes a long time for the monitor to turn on, and then it stays stuck on the ASUS screen for a while, then reboots. This happens 2-3 times. Eventually, the system boots into Windows.

I'm using a Ryzen 3600, C7H Wifi. RAM timings and voltage are manually set to their stock values (3200 at CL16). This worked fine on 2501.

[EZ_PC_TECH]

1. Version 2901 have some real issue with overheating,
CPU PWM & Q-FAN PWM (CPU & PCH) are ignoring critical temps over 75c, system is going to shut down by its own reaching 95c.

2. there is as well some strange read-out trouble with HWiNFO, CPU Socket Temp is jumping between 127c and 255c for some seconds once an hour, fans are going crazy.

My system RM650, 3900x, 2070s, CH VII

The thing is, that 75C isn't a critical temp for the Ryzen. It's a perfectly fine temp, especially with a PBO enabled. I have a hard time to imagine which processor made ASUS think that 75C is critical (FX maybe? ). They could fix the boost for Ryzen (doubtful) and it leads to higher temps, but it's perfectly fine to see ~80C since it won't hurt your hardware even in the long run. If you see higher than 80C temps, think about your cooling solution or application of the thermal compound, because of goo cooler won't let the temps go higher than 70-75C. For instance, my 3700X temps under AVX load or torture tests hovering around 59C with a water cooling.

[bigtop1967]

Links to betas (AGESA 1004B) for the CH6 and CH7 can be found here, courtesy of Mumak (HWInfo author)

https://www.overclock.net/forum/11-a...l#post28224308

[EZ_PC_TECH]

Links to betas (AGESA 1004B) for the CH6 and CH7 can be found here, courtesy of Mumak (HWInfo author)

https://www.overclock.net/forum/11-a...l#post28224308

Hi! Thanks for the link. How is you multi-core with 1004? It seems like the TDP/PPT/EDC start to work properly, and not my multi-core is limited to 4115 instead of 4200 as I was with 1003.

[bigtop1967]

Hi! Thanks for the link. How is you multi-core with 1004? It seems like the TDP/PPT/EDC start to work properly, and not my multi-core is limited to 4115 instead of 4200 as I was with 1003.

Interesting

I'm not installing the beta - seems they (AMD) stripped out the CPU per CCX/CCD OCing for us X370/X470 users. 1003 works fine for me - until I can OC my CPU from the bios, I won't be updating unless something comes with that functionality and/or performance increase.

[Duvar]

The best thing stripped out?...