Latest C7H BIOS

[Grimpak]

....sooooo... I know it says it is not reccomended but, anyone has experience with the new bios and ryzen 2000?

[RNG_AGESA]

okay there are no 5900x available atm.... F

ASUS please release those 2 PCIe 3.0 functions (SAM support) for ZEN2 > like gigabyte did it weeks ago on x470 with full Zen3 support .

[AlxUruguay]

Just my $0.02. I´ve upgraded the BIOS to the 4001 beta using an old 2700X and it worked just fine and I was lucky enough to get a 5900X which is working perfectly fine for a couple of days now. The only thing is, I have two SSD, one with Windows 10 and another one with Windows 7. I cannot launch Windows 7, I´m getting a message stating that the bios in this system is not fully acpi compliant. Tried to reset the BIOS to it´s default settings a couple of times and even tried to reinstall Windows 7 but as soon as the installer launches, PUM, BSOD with that error over and over again.
Please let me know if you have any ideas about this issue.

Besides that, I have 4x16GB 3466Mhz sticks that I could never use it at that speed with the 2700x before and now it is running at 3733Mhz, so I cannot complain about that

Regards,
Ale

[RNG_AGESA]

thank you so much for beta 4001!

BIOS have all the small features like Fmax and SAM, even for ZEN2

+ 100MHz for 3900x on top!
and ofc ZEN3 support

lovelovelove

[AlxUruguay]

Hello guys and girls, quick question for the more experienced people around. I just found in multiple reviews that a 5900X CPU , running Cinebench R23, should give between 1600 and 1670 points. Mine´s, in this motherboard, is giving 1378 points only. I know this is a beta BIOS (4001) and this is "only" a X470 motherboard, but we are talking about 15% difference here.
Any ideas?

Thanks in advance.
Ale

[trotol]

Hello guys and girls, quick question for the more experienced people around. I just found in multiple reviews that a 5900X CPU , running Cinebench R23, should give between 1600 and 1670 points. Mine´s, in this motherboard, is giving 1378 points only. I know this is a beta BIOS (4001) and this is "only" a X470 motherboard, but we are talking about 15% difference here.
Any ideas?

Thanks in advance.
Ale

what`s your DRAM freq.?

[xeizo]

Hello guys and girls, quick question for the more experienced people around. I just found in multiple reviews that a 5900X CPU , running Cinebench R23, should give between 1600 and 1670 points. Mine´s, in this motherboard, is giving 1378 points only. I know this is a beta BIOS (4001) and this is "only" a X470 motherboard, but we are talking about 15% difference here.
Any ideas?

Thanks in advance.
Ale

I run C7H/5900X with bios 4001, I have 1600+/21800 in CB R23. What I've found is PBO/Auto OC etc tanks performance with Zen 3. Just run like everything on Auto and the scores will come. Zen 3 har much tighter control of everything than Zen+/Zen 2, "helpful" bios settings just confuses it and as Zen 3 is extreme stable it almost never crashes with strange settings. It just lowers the performance.

Only settings of bigger interest is VDDP, VDDG and VTT which Asus notoriously sets wrong so you can't achieve a high memory overclock, just set those manual and you're good to go.

Oh. almost forgot, a BIG factor for Ryzen performance is temps as it scales dramatically when temps changes. Those with big scores have big cooling.

[AlxUruguay]

what`s your DRAM freq.?

It is 3466 but I could OC up to 3733. Right now is running at 3600.

[AlxUruguay]

I run C7H/5900X with bios 4001, I have 1600+/21800 in CB R23. What I've found is PBO/Auto OC etc tanks performance with Zen 3. Just run like everything on Auto and the scores will come. Zen 3 har much tighter control of everything than Zen+/Zen 2, "helpful" bios settings just confuses it and as Zen 3 is extreme stable it almost never crashes with strange settings. It just lowers the performance.

Only settings of bigger interest is VDDP, VDDG and VTT which Asus notoriously sets wrong so you can't achieve a high memory overclock, just set those manual and you're good to go.

Oh. almost forgot, a BIG factor for Ryzen performance is temps as it scales dramatically when temps changes. Those with big scores have big cooling.

Thanks for your reply xeizo
The thing is I´ve tried to leave it by default, then manually at 4.6GHZ and now with PBO/Auto OC and the results were quite similar. In fact, for example, running SOTTR benchmark with my RTX 2060 I used to get 99fps with the 2700X and now I´m getting 94fps (in a new clean Windows installation)
I´m new to Zen 3 and AMD OC in general. Would you be so kind and share your CPU configuration? Right now I have everything in stock, applied a mild OC to the memory (from 3466 to 3600) and PBO enabled, that´s it.
Thanks in advance.

BTW, I have similar fan/cooler solution Noctua NH-D15 (non chromax)

[xeizo]

Thanks for your reply xeizo
The thing is I´ve tried to leave it by default, then manually at 4.6GHZ and now with PBO/Auto OC and the results were quite similar. In fact, for example, running SOTTR benchmark with my RTX 2060 I used to get 99fps with the 2700X and now I´m getting 94fps (in a new clean Windows installation)
I´m new to Zen 3 and AMD OC in general. Would you be so kind and share your CPU configuration? Right now I have everything in stock, applied a mild OC to the memory (from 3466 to 3600) and PBO enabled, that´s it.
Thanks in advance.

BTW, I have similar fan/cooler solution Noctua NH-D15 (non chromax)

Current settings, runs performant, I did not have permissions to provide a attachment so I'll try to text spam instead

[2020/12/08 18:57:16]
Ai Overclock Tuner [Default]
CPU Core Ratio [Auto]
Performance Bias [Auto]
Memory Frequency [DDR4-3800MHz]
FCLK Frequency [1900MHz]
Core Performance Boost [Enabled]
SMT Mode [Auto]
Core VID [Auto]
CCX0 Ratio [Auto]
CCX0 Ratio [Auto]
TPU [Keep Current Settings]
PBO Fmax Enhancer [Auto]
Precision Boost Overdrive [Auto]
Max CPU Boost Clock Override [200]
Platform Thermal Throttle Limit [Auto]
Mem Over Clock Fail Count [10]
DRAM CAS# Latency [16]
DRAM RAS# to CAS# Read Delay [16]
DRAM RAS# to CAS# Write Delay [16]
DRAM RAS# PRE Time [16]
DRAM RAS# ACT Time [30]
Trc [42]
TrrdS [6]
TrrdL [8]
Tfaw [35]
TwtrS [4]
TwtrL [12]
Twr [12]
Trcpage [Auto]
TrdrdScl [4]
TwrwrScl [4]
Trfc [298]
Trfc2 [Auto]
Trfc4 [Auto]
Tcwl [16]
Trtp [8]
Trdwr [8]
Twrrd [5]
TwrwrSc [1]
TwrwrSd [7]
TwrwrDd [7]
TrdrdSc [1]
TrdrdSd [5]
TrdrdDd [5]
Tcke [1]
ProcODT [36.9 ohm]
Cmd2T [1T]
Gear Down Mode [Enabled]
Power Down Enable [Disabled]
RttNom [Rtt_Nom Disable]
RttWr [RZQ/3]
RttPark [RZQ/1]
MemAddrCmdSetup [Auto]
MemCsOdtSetup [Auto]
MemCkeSetup [Auto]
MemCadBusClkDrvStren [24.0 Ohm]
MemCadBusAddrCmdDrvStren [24.0 Ohm]
MemCadBusCsOdtDrvStren [24.0 Ohm]
MemCadBusCkeDrvStren [24.0 Ohm]
CPU Load-line Calibration [Auto]
CPU Current Capability [Auto]
CPU VRM Switching Frequency [Auto]
VRM Spread Spectrum [Auto]
CPU Power Duty Control [T.Probe]
CPU Power Phase Control [Auto]
CPU Power Thermal Control [120]
VDDSOC Load-line Calibration [Auto]
VDDSOC Current Capability [Auto]
VDDSOC Switching Frequency [Auto]
VDDSOC Phase Control [Auto]
DRAM Current Capability [100%]
DRAM Power Phase Control [Extreme]
DRAM Switching Frequency [Auto]
DRAM VBoot Voltage [1.42000]
Force OC Mode Disable [Disabled]
VTTDDR Voltage [0.72500]
VPP_MEM Voltage [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
VDDP Voltage [0.99000]
1.8V Standby Voltage [Auto]
CPU 3.3v AUX [Auto]
2.5V SB Voltage [Auto]
DRAM R1 Tune [Auto]
DRAM R2 Tune [Auto]
DRAM R3 Tune [Auto]
DRAM R4 Tune [Auto]
PCIE Tune R1 [Auto]
PCIE Tune R2 [Auto]
PCIE Tune R3 [Auto]
PLL Tune R1 [Auto]
PLL reference voltage [Auto]
T Offset [Auto]
Sense MI Skew [Auto]
Sense MI Offset [Auto]
Promontory presence [Auto]
Clock Amplitude [Auto]
CLDO VDDP voltage [0.990]
CPU Core Voltage [Auto]
CPU SOC Voltage [Manual mode]
- VDDSOC Voltage Override [1.10000]
DRAM Voltage [1.38000]
VDDG CCD Voltage Control [1.000]
VDDG IOD Voltage Control [1.000]
1.8V PLL Voltage [Auto]
1.05V SB Voltage [Auto]
Firmware TPM [Disable]
Erase fTPM NV for factory reset [Enabled]
PSS Support [Auto]
NX Mode [Enabled]
SVM Mode [Disabled]
Onboard LED [Enabled]
Q-Code LED Function [Enabled]
SATA Port Enable [Enabled]
SATA Mode [AHCI]
NVMe RAID mode [Disabled]
SMART Self Test [Enabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
Hot Plug [Disabled]
HD Audio Controller [Enabled]
M.2_2 PCIe Bandwidth Configuration [Auto]
PCIEX16/X8_1 Mode [Auto]
PCIEX8/X4_2 Mode [Auto]
PCIEX4_3 Mode [Auto]
M.2_1 Link Mode [Auto]
M.2_2 Link Mode [Auto]
SB Link Mode [Auto]
Asmedia USB 3.1 Controller [Enabled]
USB Type C Power Switch [Auto]
When system is in working state [On]
When system is in sleep, hibernate or soft off states [On]
Intel LAN Controller [Enabled]
Intel LAN OPROM [Disabled]
ErP Ready [Disabled]
Restore On AC Power Loss [Power Off]
Power On By PCI-E/PCI [Disabled]
Power On By RTC [Disabled]
Above 4G Decoding [Enabled]
Re-Size BAR Support [Auto]
SR-IOV Support [Disabled]
Legacy USB Support [Enabled]
XHCI Hand-off [Enabled]
KingstonDataTraveler 2.0PMAP [Auto]
Seagate Expansion Desk 070B [Auto]
USB Device Enable [Enabled]
U31G2_EC3 [Enabled]
U31G2_EA2 [Enabled]
U31G2_E1 [Enabled]
U31G1_2 [Enabled]
U31G1_3 [Enabled]
U31G1_4 [Enabled]
U31G1_5 [Enabled]
U31G1_6 [Enabled]
U31G1_7 [Enabled]
U31G1_8 [Enabled]
U31G1_9 [Enabled]
U31G1_10 [Enabled]
USB11 [Enabled]
USB12 [Enabled]
USB13 [Enabled]
USB14 [Enabled]
USB15 [Enabled]
Network Stack [Disabled]
Device [KINGSTON SA400S371920G]
CPU Temperature [Monitor]
MotherBoard Temperature [Monitor]
PCH Temperature [Monitor]
T_Sensor1 Temperature [Monitor]
EXT_Sensor1 Temperature [Monitor]
EXT_Sensor2 Temperature [Monitor]
EXT_Sensor3 Temperature [Monitor]
CPU Fan Speed [Monitor]
Chassis Fan 1 Speed [Monitor]
Chassis Fan 2 Speed [Monitor]
Chassis Fan 3 Speed [Monitor]
W_PUMP+ Speed [Monitor]
HAMP Fan Speed [Monitor]
CPU Optional Fan Speed [Monitor]
AIO_PUMP Speed [Monitor]
Extension Fan 1 Speed [Monitor]
Extension Fan 2 Speed [Monitor]
Extension Fan 3 Speed [Monitor]
W_FLOW Speed [Monitor]
W_IN Temperature [Monitor]
W_OUT Temperature [Monitor]
CPU Core Voltage [Monitor]
3.3V Voltage [Monitor]
5V Voltage [Monitor]
12V Voltage [Monitor]
CPU Q-Fan Control [Auto]
CPU Fan Smoothing Up/Down Time [0 sec]
CPU Fan Speed Lower Limit [200 RPM]
CPU Fan Profile [Standard]
Chassis Fan 1 Q-Fan Control [Auto]
Chassis Fan 1 Q-Fan Source [CPU]
Chassis Fan 1 Smoothing Up/Down Time [0 sec]
Chassis Fan 1 Speed Low Limit [200 RPM]
Chassis Fan 1 Profile [Standard]
Chassis Fan 2 Q-Fan Control [Auto]
Chassis Fan 2 Q-Fan Source [CPU]
Chassis Fan 2 Smoothing Up/Down Time [0 sec]
Chassis Fan 2 Speed Low Limit [200 RPM]
Chassis Fan 2 Profile [Standard]
Chassis Fan 3 Q-Fan Control [Auto]
Chassis Fan 3 Q-Fan Source [CPU]
Chassis Fan 3 Smoothing Up/Down Time [0 sec]
Chassis Fan 3 Speed Low Limit [200 RPM]
Chassis Fan 3 Profile [Standard]
HAMP Fan Q-Fan Control [Auto]
HAMP Fan Q-Fan Source [CPU]
HAMP Fan Smoothing Up/Down Time [0 sec]
HAMP Fan Speed Low Limit [200 RPM]
HAMP Fan Profile [Standard]
Extension Fan 1 Q-Fan Control [DC Mode]
Extension Fan 1 Q-Fan Source [CPU]
Extension Fan 1 Speed Low Limit [200 RPM]
Extension Fan 1 Profile [Standard]
Extension Fan 2 Q-Fan Control [DC Mode]
Extension Fan 2 Q-Fan Source [CPU]
Extension Fan 2 Speed Low Limit [200 RPM]
Extension Fan 2 Profile [Standard]
Extension Fan 3 Q-Fan Control [DC Mode]
Extension Fan 3 Q-Fan Source [CPU]
Extension Fan 3 Speed Low Limit [200 RPM]
Extension Fan 3 Profile [Standard]
AIO_PUMP/W_PUMP+ Control [Disabled]
Above 4GB MMIO Limit [39bit (512GB)]
Fast Boot [Enabled]
NVMe Support [Enabled]
Next Boot after AC Power Loss [Normal Boot]
AMI Native NVMe Driver Support [Enabled]
Boot Logo Display [Enabled]
POST Delay Time [3 sec]
Boot up NumLock State [Enabled]
Wait For 'F1' If Error [Enabled]
Option ROM Messages [Enabled]
Interrupt 19 Capture [Disabled]
Setup Mode [Advanced Mode]
Launch CSM [Disabled]
OS Type [Other OS]
Setup Animator [Disabled]
ASUS Grid Install Service [Enabled]
Profile Name []
Save to Profile [1]
CPU Core Voltage [Auto]
VDDSOC Voltage [Auto]
1.8V PLL Voltage [Auto]
BCLK Frequency [Auto]
CPU Ratio [Auto]
DIMM Slot Number [DIMM_A2]
Bus Interface [PCIEX16/X8_1]
Custom Pstate0 [Auto]
L1 Stream HW Prefetcher [Auto]
L2 Stream HW Prefetcher [Auto]
Core Watchdog Timer Enable [Auto]
SMEE [Auto]
Core Performance Boost [Auto]
Global C-state Control [Auto]
Power Supply Idle Control [Auto]
SEV ASID Count [Auto]
SEV-ES ASID Space Limit Control [Auto]
Streaming Stores Control [Auto]
Local APIC Mode [Auto]
ACPI _CST C1 Declaration [Auto]
MCA error thresh enable [Auto]
PPIN Opt-in [Auto]
Fast Short REP MOVSB [Enabled]
Enhanced REP MOVSB/STOSB [Enabled]
RdRand Speedup Disable [Enabled]
IBS hardware workaround [Auto]
DRAM scrub time [Auto]
Poison scrubber control [Auto]
Redirect scrubber control [Auto]
Redirect scrubber limit [Auto]
NUMA nodes per socket [Auto]
Memory interleaving [Auto]
Memory interleaving size [Auto]
1TB remap [Auto]
DRAM map inversion [Auto]
ACPI SRAT L3 Cache As NUMA Domain [Auto]
ACPI SLIT Distance Control [Auto]
ACPI SLIT remote relative distance [Auto]
GMI encryption control [Auto]
xGMI encryption control [Auto]
CAKE CRC perf bounds Control [Auto]
4-link xGMI max speed [Auto]
3-link xGMI max speed [Auto]
xGMI TXEQ Mode [Auto]
PcsCG control [Auto]
Disable DF to external downstream IP SyncFloodPropagation [Auto]
Disable DF sync flood propagation [Auto]
CC6 memory region encryption [Auto]
Memory Clear [Auto]
Overclock [Enabled]
Memory Clock Speed [Auto]
Tcl [Auto]
Trcdrd [Auto]
Trcdwr [Auto]
Trp [Auto]
Tras [Auto]
Trc Ctrl [Auto]
TrrdS [Auto]
TrrdL [Auto]
Tfaw Ctrl [Auto]
TwtrS [Auto]
TwtrL [Auto]
Twr Ctrl [Auto]
Trcpage Ctrl [Auto]
TrdrdScL Ctrl [Auto]
TwrwrScL Ctrl [Auto]
Trfc Ctrl [Auto]
Trfc2 Ctrl [Auto]
Trfc4 Ctrl [Auto]
Tcwl [Auto]
Trtp [Auto]
Tcke [Auto]
Trdwr [Auto]
Twrrd [Auto]
TwrwrSc [Auto]
TwrwrSd [Auto]
TwrwrDd [Auto]
TrdrdSc [Auto]
TrdrdSd [Auto]
TrdrdDd [Auto]
ProcODT [Auto]
Power Down Enable [Disabled]
Disable Burst/Postponed Refresh [Auto]
DRAM Maximum Activate Count [Auto]
Cmd2T [1T]
Gear Down Mode [Enabled]
CAD Bus Timing User Controls [Auto]
CAD Bus Drive Strength User Controls [Auto]
Data Bus Configuration User Controls [Auto]
Data Poisoning [Auto]
DRAM Post Package Repair [Default]
RCD Parity [Auto]
DRAM Address Command Parity Retry [Auto]
Write CRC Enable [Auto]
DRAM Write CRC Enable and Retry Limit [Auto]
Disable Memory Error Injection [True]
DRAM ECC Symbol Size [Auto]
DRAM ECC Enable [Auto]
DRAM UECC Retry [Auto]
TSME [Auto]
Data Scramble [Auto]
DFE Read Training [Auto]
FFE Write Training [Auto]
PMU Pattern Bits Control [Auto]
MR6VrefDQ Control [Auto]
CPU Vref Training Seed Control [Auto]
Chipselect Interleaving [Auto]
BankGroupSwap [Auto]
BankGroupSwapAlt [Auto]
Address Hash Bank [Auto]
Address Hash CS [Auto]
Address Hash Rm [Auto]
SPD Read Optimization [Enabled]
MBIST Enable [Disabled]
Pattern Select [PRBS]
Pattern Length [6]
Aggressor Channel [1 Aggressor Channel]
Aggressor Static Lane Control [Disabled]
Target Static Lane Control [Disabled]
Worst Case Margin Granularity [Per Chip Select]
Read Voltage Sweep Step Size [1]
Read Timing Sweep Step Size [1]
Write Voltage Sweep Step Size [1]
Write Timing Sweep Step Size [1]
IOMMU [Auto]
Precision Boost Overdrive [Auto]
Precision Boost Overdrive Scalar [Auto]
FCLK Frequency [1900MHz]
SOC OVERCLOCK VID [0]
UCLK DIV1 MODE [UCLK==MEMCLK]
VDDP Voltage Control [Manual]
VDDP Voltage [0]
VDDG Voltage Control [Manual]
VDDG Voltage [0]
SoC/Uncore OC Mode [Enabled]
LN2 Mode [Auto]
ACS Enable [Auto]
PCIe ARI Support [Auto]
PCIe ARI Enumeration [Auto]
PCIe Ten Bit Tag Support [Disable]
cTDP Control [Auto]
EfficiencyModeEn [Auto]
Package Power Limit Control [Auto]
APBDIS [Auto]
DF Cstates [Auto]
CPPC [Auto]
CPPC Preferred Cores [Auto]
NBIO DPM Control [Auto]
Early Link Speed [Auto]
Presence Detect Select mode [Auto]
Preferred IO [Auto]
CV test [Auto]
Loopback Mode [Auto]