X370 X470 AGESA 1003AB Bioses

[mito1172]

@Shamino

seems like Asus already uploaded C6H BIOS 7501, did it include the dram boot error fix found in 0075?

https://dlcdnets.asus.com/pub/ASUS/m...-ASUS-7501.zip

someone using the 1700x processor says that the same problem persists. Funny ASUS is back again

7501 causes double power up/down even at default bios settings if "ErP S4/S5" is activated or PSU unplugged. (CPU 1700x ).
0075 is OK, no problem.

[EZ_PC_TECH]

Didn't get a BSOD today after switching to Ryzen balanced plan and 80% minimum processor state, also swapped back the 3200 CL14 Ripjaws RAM but running 2133 at the moment and done some chkdsk repairs (The master file table's (MFT) BITMAP attribute is incorrect).

Installed these chipset drivers, set 80% minimum processor state again and got a 0x00000051 REGISTRY_ERROR BSOD almost immediately and 0x000000f7 DRIVER_OVERRAN_STACK_BUFFER at the next restart while writing this post.

Maybe i should use Revo Uninstaller to completely remove the chipset drivers along with registry entries and then reinstall them just to be sure. Will also switch back to 3200 CL14 profile at some point.

Yes, I always use Revo uninstaller to delete drivers. Also, all your BSOD codes are directly related to CPU voltage. Does your voltage set to auto?

[TechyInAZ]

So I'm on ABBA with the 3600, not much of a difference. (C6H)

4.15ghz single core turbo, and 3.695GHz all core.

EDIT: Sorry sorry i mean 3.965GHz all core. Not 3.6.

[hughjazz44]

New BIOS, 7501, Fan Smoothing STILL DOES NOT WORK!!!

[TechyInAZ]

Strange, try maybe a 2.6sec fan delay?

Also guys, this BIOS still has ECC mode enabled. So make sure to disable it in AMD CBS options.

7501 has been pretty good, still shuts down and boots up when restarting but once i get into windows, no issues whatsoever.

[hughjazz44]

Strange, try maybe a 2.6sec fan delay?

Nothing works. Even if I set absurdly long times like 30 seconds, the CPU fan will still ramp up and down continuously.

[igralec84]

Yes, I always use Revo uninstaller to delete drivers. Also, all your BSOD codes are directly related to CPU voltage. Does your voltage set to auto?

Used Revo and installed the drivers freshly, also left the Ryzen Balanced power plan as it is, so 99% minimum state. I think by default CPU voltage is Auto in BIOS, i only set the fan curves, ECC disabled and power down to enabled.
Will see how it goes over the weekend, currently still at 2133 RAM speed.

Maybe running 5% and 10% minimum processor state in windows and ryzen balanced plan all this time messed up something vcore related? I did have 5 days BSOD free earlier this month, don't remember what i did but it had to be "right" (maybe fresh chipset install, chkdsk to repair filesystem errors from BSODs, freezes, CMOS clear before switching BIOS profiles for RAM OC).

[bloot]

Strange, try maybe a 2.6sec fan delay?

Also guys, this BIOS still has ECC mode enabled. So make sure to disable it in AMD CBS options.

7501 has been pretty good, still shuts down and boots up when restarting but once i get into windows, no issues whatsoever.

0075 does not shut down and boot up when restarting the system

[maxrealliti]

BSOD, BSOD, I don’t understand what the company is doing at the moment, I certainly understand what needs to be done to support the 3000 series, but not at a loss of the 1000 and 2000 series, at the moment my PC doesn’t completely work at all, the error stability and the blue screen constantly work, which is normal in overclocking, guys correct this error all the forums are flooded with these errors that amd what you have, drivers and old BIOS versions for some reason do not correct the error the BIOS set 1701, the chipset is already 17 years old and anyway there are errors that could have been done so that everything to spoil?

[maxrealliti]

https://www.amd.com/ru/support/chips...ocket-am4/x370
anyone who has problems with errors try the new chipset driver helped me