X370 X470 AGESA 1003AB Bioses

[Trylen]

all the links I tried for the beta bioses came up 404, do we have working ones?

[adr82]

At this point I couldn't give two craps about a little boost here or there. I did see the chipset drivers update, some stuff I was reading was saying it was best not to install it until you had the new agesa update but I'm not sure how true that is.

I just don't like feeling like I'm getting less support buying an ROG strix series product.

Less support than what? IIRC there isn't a single Asus board with an official 1.0.0.3ABB BIOS yet, is there? As a company they're just sh*t at getting BIOS updates pushed out.

I'm not sure I even believe they'd be organised enough to selectively prioritise certain boards...

[Baio73]

There are bugs in AGESA 1003 - whatever version you get - especially with boost.

Make sure you update to the latest chipset drivers. Do the latest ones from ASUS, then the latest from AMD, which should fix detiny 2.

So they are different?
I thought they were the same version…
Too much confusion around this point. I don't care if Asus uses a numeration and AMD another, but they should be the same driver.

Baio

[mvmiller12]

all the links I tried for the beta bioses came up 404, do we have working ones?

That would be because people are incorrectly copying the URL links - the middle part is missing on most of these, a problem that could have been avoided by manually using the URL tags...

Here you go, all still working:

Crosshair VI Hero 7304
Crosshair VI Hero WiFi 7303


Crosshair VIII Formula 0803
Crosshair VIII Hero 0803
Crosshair VIII Hero WiFi 0803

[Trylen]

thank you muchly!

[stathis.christofas]

Hello ppl , I have an x470 I gaming and while I managed to find my way through some problems I had in the beginning after installing my 3700x there is still one.

I can't Post with DOCP on and my Rams will stay at 2133mhz CL15
While they are advertised as 3200mhz CL14 ( Corsair Vengeance PRO RGB 16GB )
Whenever I activate it , I see the Memory voltage to be set to 1.35 and when I save and reset the pc it just starts Running GPU And chassis Fans at Max and nothing happens at all it just stays like that.

Any ideas of how I can wake them up?
I'm in 2501 atm.
As far as I read there is no other person that have tested this Beta Bios so I can have some feedback .

I guess I will maybe be the first but If there is another way it would be nice to know , thanks in advance!

[igralec84]

Maybe your motherboard also needs a Vboot voltage at 1.35v, like the crosshairs to POST.

[mikev190]

Maybe your motherboard also needs a Vboot voltage at 1.35v, like the crosshairs to POST.

The Crosshair VI doesn't need boot voltage setting on 7304

[TechyInAZ]

Ryzen 5 3600 + Crosshair VI Hero here

On 7106 I've found I can post easily into windows and it's pretty stable with my 3200mhz RAM kit at it's XMP profile, however it will crash in DCS world.

I've found that running the ram at 2133mhz but clocking the FCLK to 1600mhz is basically nearly as quick, but I don't have any issues with memory compatibility.

Should help until we get proper BIOS revisions with updated AGESA codes.

[mikev190]

@Shamino

Are the ABB bios for C6H going to fix the boosting issue with 3600? All current bios have the issue. I'm not hitting 4.2ghz at all. I can manually overclock to 4.2ghz @ 1.325v so the silicon can handle it.

I've spoken with countless people with the same issue. TDC & PPT values are frozen too. Steve @ Hardware unboxed said to me in a youtube comment it was a bios issue.

If its not being fixed in AB can you at least confirm you are aware of the issue? Sucks playing games at 4050mhz and lower. Thanks