X370 X470 AGESA 1003AB Bioses

[TechyInAZ]

Same here, when i went to 7401 my GPU driver re-initalized.

Changed my M.2 and Nvidia GPU to GEN 3 manually. Thanks for that!!!

Oh and I recommend setting performance Bias to none, I changed that just recently, and it seems to be working better.

[ZEEED]

Stuttering sound thats new. Ill reinstall chipset drives gpu and sound drivers just in case

[datspike]

BCLK seems broken on the C6H. Just forces the cpu into overclock mode and drops to baseclock 1.2v.

To make boost work with BCLK you need to set core performance boost to enabled, set the vcoltage to offset mode without any changes to the actual offset, and then enable PBO/Default/AutoOC profile from windows Ryzen Master.
https://i.imgur.com/ZQIkZV7.png
Clocks while playing Apex with BCLK at 102.6

edit wrong quote

[TechyInAZ]

Oh and make sure y'all are on the latest Culminate update for Windows 10 1903. Microsoft released a bunch of bug fixes.

[bigtop1967]

Non fully validated ABB versions of 370/470 if you wish to try

https://www.dropbox.com/s/i2niylkkh0...-2701.rar?dl=0

https://www.dropbox.com/s/4mgdinkmn5...-2701.rar?dl=0

https://www.dropbox.com/s/b9a6xp23p3...-7401.rar?dl=0

https://www.dropbox.com/s/j4jm5i1db5...-7401.rar?dl=0

https://www.dropbox.com/s/n6hqb8q0l6...-7401.rar?dl=0

https://www.dropbox.com/s/p86b1o2frn...-2701.rar?dl=0

https://www.dropbox.com/s/zeuq42zor2...-2701.rar?dl=0

Thank you! Much appreciated.

Hope you had a good break

[igralec84]

So now running the 2701 on CH7 + 3600X

No boost, stuck at 3793.1Mhz max on all cores.
Will have to play a little with BIOS settings, maybe the performance enhancement ones if anything helps but probably not.
Hasn't crashed yet for no reason like the previous beta version did with 5 random BSODs, voltages and temps are nice and low thanks to no boost probably.
Will try manual OC and benchmarks tomorrow with all-core 4.325ghz that was stable with 2501, no boost probably won't hurt there.
Also curious to see if i'll get the C5 after turning power off on the wall for the night, which was a chore in 2501 every day with the CMOS clear.

[gupsterg]

:@gupsterg new performance bias on this 2701 CB15 Agressive must be mega aggressive crashed on windows loading hahaahha

Yes seen the updated PB settings, not tried them yet.

I have 2x16GB dual rank, and the same settings did not work in both bioses. The memory settings which are rock solid in 2501 made the board sound the alarm signal at boot and reset to 2133MHz/c15. Same settings and just a bump from 1.35V to 1.37V made 3733MHz work, but not 3800MHz.

Dunno. Only thing I can think of is if you're not manually setting ProODT then [Auto] has a differing default for UEFI 2406 & 2501 vs the other releases.

[bigtop1967]

Curiously - I've found while testing 2602, that boost works better with certain ram frequencies/OCs.

I've been busy today so not tested new bios - not sure if I will yet - if there isn't much difference.

I also discovered that I could push my ram harder than I thought - managed to get 3733CL13 working - I think it was 1.5v. Will post results if they're worth seeing.

Finished my testing today with a CB15 score of 3282 (stable) at 3733CL14 (all with GD off). But not tested enough yet.

I didn't really expect much from any other beta based on 1003 (and that is what this is) version.

Official releases will only ever appear on the official motherboard pages. Sometimes a version will be validated and released, but anything posted here is NOT release software unless specifically stated.

[ZEEED]

Ended up with 4 hours of digging whats the deal with my stuttering sound its fixt
https://i.imgur.com/moDkmv8.png
I was hitting 100ms after 3-4 minutes after boot . On top of that NV driver was on high latency. Sorted both.

Solution nr1
https://www.overclock.net/forum/11-a...c-latency.html

Solution nr2 if ya on nv
https://github.com/Sleepydragn1/Disa...idia-Telemetry
https://nvworld.ru/utilities/pmmanager/

4 hours of checking this and that. Did not had this problem on 2501.

[TechyInAZ]

Reporting back, so changing my GPU and M.2 to Gen 3 solve all my issues with glitching and stuff. My system is running incredibly smooth right now, never been like this before since i put my 3600 in.

I also changed performance bias to none, not sure if that helped or not.

and I'm running auto on everything, except I have my DOCP profile set for my 3200mhz 16-18-18-36 kit.