Page 66 of 91 FirstFirst ... 16 56 64 65 66 67 68 76 ... LastLast
Results 651 to 660 of 902
  1. #651
    ROG Guru: White Belt Array
    Join Date
    Dec 2020
    Reputation
    17
    Posts
    85

    Quote Originally Posted by FlufflePuff1337 View Post
    3405 bios works best with new amd chipset driver btw it adressed some stability also, i would say its probably required with thisbios update.
    3405 seems okay so far, no restarts or RAM issues so far but early days. However, the M.2 fan is not configurable in this bios version! Try it and see, even although it gives access to the fan curve graph in the bios in Q fan; it does nothing to alter it's speed up or down. It is now calling the chipset fan the PCH fan, but not letting the user select values for it, so it's stuck at 3100RPM for me! (also doesn't work in fan xpert clearly because even the bios is confused so to be expected).

    PS I grabbed the chipset driver, still M.2 fan issue...
    Last edited by primeshooter; 02-10-2021 at 11:17 PM.

  2. #652
    New ROGer Array
    Join Date
    Jan 2021
    Reputation
    10
    Posts
    4

    I just upgraded to 3405 and I immediately ran into issues. My motherboard would no longer recognize my NVME drive as bootable. I have tried going back to 3001 with no luck. It recognizes the drives are connected but they don't show them as bootable an longer.

    AMD Ryzen 9 5900X (stock clock)
    WD Black NVME SN850 2TB

  3. #653
    ROG Member Array
    Join Date
    Dec 2020
    Reputation
    10
    Posts
    10

    Quote Originally Posted by DThornburg View Post
    I just upgraded to 3405 and I immediately ran into issues. My motherboard would no longer recognize my NVME drive as bootable. I have tried going back to 3001 with no luck. It recognizes the drives are connected but they don't show them as bootable an longer.

    AMD Ryzen 9 5900X (stock clock)
    WD Black NVME SN850 2TB
    I've seen a lot of people with this bug so far.. pretty lame for a non beta bios. Go to boot order, I think you have to enable it in there somewhere.

  4. #654
    New ROGer Array
    Join Date
    Jan 2021
    Reputation
    10
    Posts
    3

    Anyone know if the asus stx sound card still works with bios after 1404? im still on 1404 and thinking of upgrading but it seems the latest bios is having problems

  5. #655
    Banned Array
    Join Date
    Sep 2020
    Reputation
    10
    Posts
    110

    No issues with 3405 since it came out with latest chipset drivers im pretty satisfied.

  6. #656
    ROG Member Array
    Join Date
    Dec 2020
    Reputation
    10
    Posts
    10

    Quote Originally Posted by FlufflePuff1337 View Post
    No issues with 3405 since it came out with latest chipset drivers im pretty satisfied.
    Good to hear!

  7. #657
    ROG Member Array
    Join Date
    Dec 2013
    Reputation
    10
    Posts
    8

    3405 is ok

    For everyone, info so that they can possibly decide to update.

    I did update from 3001 to 3405. After that, I reset the settings to default and manually re-entered all my previous ones.
    I also carried out Fan Tunning - all fans, including m.2 Fan, are working properly for me.
    There was no problem with the m.2 botable disk and other disks, including RAID0, everything started in the correct configuration. There is also no blue screen or any other undesirable and strange behavior on this version of the bios.
    My processor is RYZEN 5950. I set the memory to 3866Mhz (as before, I have not tried higher yet) I have 4 DIMMs, 32GB. In IDLE, the CPU has an identical, maybe slightly lower temperature than before.
    Last edited by dariuszd1; 02-15-2021 at 10:23 PM.

  8. #658
    ROG Guru: White Belt Array
    Join Date
    Dec 2020
    Reputation
    17
    Posts
    85

    Quote Originally Posted by dariuszd1 View Post
    For everyone, info so that they can possibly decide to update.

    I did update from 3001 to 3405. After that, I reset the settings to default and manually re-entered all my previous ones.
    I also carried out Fan Tunning - all fans, including m.2 Fan, are working properly for me.
    There was no problem with the m.2 botable disk and other disks, including RAID0, everything started in the correct configuration. There is also no blue screen or any other undesirable and strange behavior on this version of the bios.
    My processor is RYZEN 5950. I set the memory to 3866Mhz (as before, I have not tried higher yet) I have 4 DIMMs, 32GB. In IDLE, the CPU has an identical, maybe slightly lower temperature than before.
    To be clear my M.2 fan is running - that's not what I said. Check your bios, you will probably find that although it's running, it's now called the PCH fan and that isn't tunable. The M.2 fan will have a curve but it does nothing when you alter it (try it). Check fan xpert in windows (asus software). After you do fan tuning it doesn't detect the m.2 fan although it is running. It will say N/A. Why is this an issue> Because you cannot tune it's stock speed which is very high (3000RPM here). Fan xpert which I use and love, now only notices the CPU fan, and the casefans, no control over the chipset fan (probably because the bios has screwed this up).

  9. #659
    ROG Member Array
    Join Date
    Jan 2015
    Reputation
    10
    Posts
    12

    bios 3405 has been the worse bios so far for me in regards stability, I am getting many random restarts using this bios, there is no pattern whatsoever, my pc restarts only when idle, I can game, stress test and benchmark fine, but when machine is on idle mode or very low cpu usage, I get random restarts, I have reverted back to 3001 and although I am still getting restarts they are fewer and far between, I have checked other motherboard manufacturer forums and it seems that the problem lies with idle cpu state, Gigabyte and MSI are all over this problem but it seems Asus are finding it hard to get a fix, beginning to regret getting this board, Ryzen Gen 4 has been out for a while now and Asus should have at least given users a stable fix for this problem

  10. #660
    New ROGer Array
    Join Date
    Feb 2021
    Reputation
    10
    Posts
    3

    3405 Curve optimzer BUG
    Hello guys. I've installed the latest 3405 bios, and noticed some bugs in the Curve Optimizer (AMD overclocking>Precision Boost overdrive>Advanced) when used with a Ryzen 7 5800.
    Affecting a negative value in the Curve Optimzer does affect correctly the CPU (lower tensions, lower temperatures, and thus higher frequencies for longer periods), BUT the bios does NOT take correctly into accounts further modifications :
    * Once you put a negative value in CO, if you go back to Precision Boost Overdrive "Auto" (the default value), the motherboard keep your CO values and uses them.
    * If you go too far in undervolting (to high negative value in CO) and get an instable system, modifiying CO value is NOT taken into account correctly by the motherboard, either with "all cores" setting or tweaking each core individually. The system stays unstable because the corrections you make are not taken into account. The only way to go back to normal is to clear all bios settings "load optimized defaults".
    * If you have a system stable with Curve optimizer with "all cores"‚ "negative" and "10", he's not stable with a negative value of 10 on each core separately. In my case, neither with -6 for each core separately.

    @ Dave798: in case it may help you: freezes and random restarts idle or very low cpu usage (with stress tests ok) are things that happens when you do undervolting, especially via curve optimizer (all tensions lower than stock including for low cpu usage, meaning very low tensions are used in that case, with possible instability)
    Last edited by Agafous; 02-17-2021 at 04:13 PM.

Page 66 of 91 FirstFirst ... 16 56 64 65 66 67 68 76 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •