Asus ROG Strix X570-E Gaming Bios update?

[Shenny]

That is not what Shenny ask, the shortcut is on the main page in the bios, click on it and it shows ON/OFF.

Unfortunately, I don't see any such settings neither on the Main page, nor in Advanced/PCIeSubsystemSettings. Perhaps because I am with an nVidia which the CPU does not accept as eligible for BAR support. That's quite a pity because nVidia are promising to deliver such support via drivers update.
Can anybody else with an nVidia card confirm that these settings are not visible in the BIOS?

[Cybersim]

I thought no random shutdown but 1 hour ago i got caught to the random shutdown. So 3001 not fixed this issue.

You check in windows logs. Hal, or somphing other?

[Erwin05]

Unfortunately, I don't see any such settings neither on the Main page, nor in Advanced/PCIeSubsystemSettings. Perhaps because I am with an nVidia which the CPU does not accept as eligible for BAR support. That's quite a pity because nVidia are promising to deliver such support via drivers update.
Can anybody else with an nVidia card confirm that these settings are not visible in the BIOS?

You can press F12 in the bios to make a screenshot on a USb stick, now we dont see the whole bios screen.

I have a Asus GTX 1070 installed in my pc and i see the Rezise BAR shortcut on the main page in my bios.

Enable Above 4G Decoding there u also see it.

[finnstop]

3001 a no go for me. I had 1 unexpected crash at idle and then another idle crash some time after I tweaked SOC, VDDG and VDDP values as suggested here ( I also saw these same values noted elsewhere for Ryzen troubleshooting) . Back to BIOS 2606 again. Have never had any instability or crash with 2606.

[Assyrian]

Hi i have AMD Ryzen 9 5950x i update my bios from Version 2816 to Version 3001...!!! wen i gaming my cpu temperature was betwen 60–80C is a normal temperature during gaming
but i update bios to Version 3001 the temperature CPU reaching 75c to 85c somtimes 90c in gaming y ??? pllz i need som info ????

My Pc info
AMD Ryzen 9 5950X 3.4GHz Socket AM4
ASUS GeForce RTX 3080 10GB ROG STRIX GAMING OC
ASUS ROG Strix X570-E Gaming
G.Skill TridentZ Neo Series DDR4 32GB Kit 3600MHz CL16 Non-ECC
NZXT Kraken Z73 360 mm
Asus ROG Thor 1200W PSU
ASUS Case ROG STRIX HELIOS GX601

[mitcon]

Same for me, 4 days and 3 random shutdowns when machine was at idle on 3001. My CPU temps have increased higher also a little bit.

[Shenny]

You can press F12 in the bios to make a screenshot on a USb stick, now we dont see the whole bios screen.

I have a Asus GTX 1070 installed in my pc and i see the Rezise BAR shortcut on the main page in my bios.

Enable Above 4G Decoding

Thank you very much for the hint! I didn't expect that the shortcut would be tucked away in the upper right corner of the screen. Now let's see if it will have any effect. Most likely not until nVidia deliver those infamous drivers.


Regarding the others that have problems with their temps - after installing 5900X I also noticed that its core voltage was reaching almost 1.5 V with PBO enabled while my old 3700X was barely scratching 1.4 V. Not sure if it was due to the CPU or to the BIOS. To feel more comfortable, I set the Core voltage in BIOS with an offset of -0.05 V. Temperatures dropped by a few degrees during gaming and I haven't encountered any crashes under load so far.

[MiniRawr]

I tried 3001 with 3700x and no performance lose and no random shutdown so far. You can upgrade your bios to 3001.

I was using the bios 2407 before, so I hope I can help someone with what I saw until now.
I have a 3700x, 32gb hyperx 3200 set manually to 3600. I had 2 problems that are solved already.

1st, after bios update it wasn't recognizing my M.2, but it was because the CSM was reseted and I could swear the default was disable before update. I enabled it and the m.2 was there again to select for boot.

I had to set all the memory values manually, because this new bios reset all the profiles, so make sure to save in a .txt file to used them later. I didn't try to load a saved profile because I remember that I had problems with that last time I update the bios.

The second one was about the temperature, after update everything is set to auto.
I had configured it manually before, so I just change it for the same values and I was like before update. Same max temperatures, around 75C with load, using the Wrait Prism. I'm getting around 12000 pts in Cinebench R23 with PBO off and a small undervolt. If I leave PBO on and cpu voltages in auto, I get around 85C or more and around 12400pts in Cinebench (not much difference for me). I prefer a quieter and not so hot system. :-)

Another thing I notice was that the chainsaw curve cpu had when idle and that was something that was bothering me since day one, now it's gone. No more spikes in cpu utilization, no more fan speeding up, no more noise when system is idle. And cotinuing about idle states, the lower frequency I had before, was around 3200MHz if I'm not wrong, and now it seats around 2200MHz using the AMD Ryzen Balanced plan, with mininum cpu utilization set to 0.

So far, no crashes. My only wish what that this one would reduce the chipset temperature like a miracle, but mine sits around 62C all the time.
Below is the screenshot of cpu utilization in AIDA, the 2 high temps was two runs of cinebench, everything after was recorded while writing and after checking it, I think I have some malware in my system, because everytime the browser is full screen, I have this high cpu utilization and temps are close to 60C, when I change the window to aida cpu package goes to around 48C and stay flat like the end of the graphic. Time to install mallwarebytes.

[emin93]

I am also still having those random shutdowns on 3001. Is there any workaround for this without having to go back to an older version?

[Steelo]

I am also still having those random shutdowns on 3001. Is there any workaround for this without having to go back to an older version?

Yes there is. Just do it these adjustment, details in the below.

Go bios and set these in manual and no more reboot.
*Cpu Soc Voltage 1.1v
*Vddg iod 950v
*Vddg ccd 900v