Results 1 to 4 of 4
  1. #1
    ROG Member Array PanosXidis24 PC Specs
    PanosXidis24 PC Specs
    MotherboardAsus Rampage V X99
    ProcessorIntel Extreme i7 6950X
    Memory (part number)CMK32GX4M4A2666C15
    Graphics Card #1Zotac AMP Extreme 980Ti SLI
    Graphics Card #2Zotac AMP Extreme 980Ti SLI
    MonitorQnix QX 2710 O.C
    Storage #1Corsair MP500
    Storage #2RAID 0 disk drivers
    CPU CoolerArtic Freezer 360
    CaseCooler Master HAF-X
    Power SupplyThermaltake Grand Touchpower 1050w
    Mouse Zowie EC2-A
    Headset/Speakers Razer Kraken 7.1 V2
    OS windows 10
    PanosXidis24's Avatar
    Join Date
    Jun 2018
    Reputation
    10
    Posts
    15

    Asus Rampage V X99 6950X RAM QUESTION!!!

    Hello the forum!!!i have one problem and im scary little bit!!!i have 6950x with asus rampage v and 32GB RAM O.C TO 3200MHZ
    my question is what voltage SAFE VALUES on VCSSA and VCCIO i putt!!!!i run memtest86 8.2 pro and i have 20 errors is cpu errors!!!i put 1.22v VCSSA AND VCCIO TO 1,12V is and running again the memtest86 8.2 pro and all is ok no errors no nothing!!!this values on my cpu is ok???or this voltage is high and after dead cpu?thanks a lot
    Last edited by PanosXidis24; 08-12-2019 at 04:40 PM.

  2. #2
    ROG Guru: Orange Belt Array ThrashZone PC Specs
    ThrashZone PC Specs
    MotherboardASUS x99 sabertooth & x299 Rampage VI Apex
    Processori7-5930k & i9-9940x
    Memory (part number)Trident-Z 3200C14 & Trident-Z 3600C16 both Samsung B-Dies
    Graphics Card #1EVGA 1080ti FTW3 water block & Titan Xp copper water block
    MonitorAOC G2460PG 24"G-Sync 144Hz & ASUS VG248QE 24" 144Hz
    Storage #12-Samsung 970 Evo Plus 500gb M.2 & 2.5" ssd's 850 pro's for os 850 evo for games
    Storage #22-LG Blu-Ray WH16NS40
    CPU Coolerx99 2-240GTX with Heatkiller-4-Pro/ vrm water block Both&x299 2-280GTX 2-D5's before and after rads
    Case2- Corsair 450D with second floors for 240GTX & 280GTX rads enclosed and filtered on top
    Power SupplyEVGA 1000P2 & EVGA 1200P2
    Keyboard Logitech G910 Orion Spectrum & Logitech G710+
    Mouse 2-Red dragon Perdition
    OS Win-7 & win-10 pro on both systems Win-7 everyday os
    Accessory #1 Heatkiller IV Pro plexi/ Copper base on both systems
    Accessory #2 Mayhems Biocide and Inhibitor with distilled water
    Accessory #3 Mayhems 3/8-5/8" clear soft tubing
    ThrashZone's Avatar
    Join Date
    Oct 2017
    Reputation
    13
    Posts
    278

    Hi,
    Still on haswell-e personally one thing is for sure
    Auto sure does whack both way over any need for sure vccio cpu over 1.2v same for vcssa just by increasing memory frequency !! :/
    Lots of chips have been toasted on auto for these voltages

    vccio cpu should be fine with a max reading of 1.15v no more though same goes for vcssa +-
    vccio pch should be fine pegged at it's default voltage of 1.05 with a max at 1.1v+-

    vcssa well that one varies since it's an offset can be between 0.170=1.024v+- to 0.240=well under 1.15v is what I use depending on core clock higher being for 4.6-4.7
    0.195=1.060v+- for 4.5.

  3. #3
    ROG Member Array PanosXidis24 PC Specs
    PanosXidis24 PC Specs
    MotherboardAsus Rampage V X99
    ProcessorIntel Extreme i7 6950X
    Memory (part number)CMK32GX4M4A2666C15
    Graphics Card #1Zotac AMP Extreme 980Ti SLI
    Graphics Card #2Zotac AMP Extreme 980Ti SLI
    MonitorQnix QX 2710 O.C
    Storage #1Corsair MP500
    Storage #2RAID 0 disk drivers
    CPU CoolerArtic Freezer 360
    CaseCooler Master HAF-X
    Power SupplyThermaltake Grand Touchpower 1050w
    Mouse Zowie EC2-A
    Headset/Speakers Razer Kraken 7.1 V2
    OS windows 10
    PanosXidis24's Avatar
    Join Date
    Jun 2018
    Reputation
    10
    Posts
    15

    right!!!!!!!thanks
    is ok my voltage right????no problem?

  4. #4
    ROG Guru: Orange Belt Array ThrashZone PC Specs
    ThrashZone PC Specs
    MotherboardASUS x99 sabertooth & x299 Rampage VI Apex
    Processori7-5930k & i9-9940x
    Memory (part number)Trident-Z 3200C14 & Trident-Z 3600C16 both Samsung B-Dies
    Graphics Card #1EVGA 1080ti FTW3 water block & Titan Xp copper water block
    MonitorAOC G2460PG 24"G-Sync 144Hz & ASUS VG248QE 24" 144Hz
    Storage #12-Samsung 970 Evo Plus 500gb M.2 & 2.5" ssd's 850 pro's for os 850 evo for games
    Storage #22-LG Blu-Ray WH16NS40
    CPU Coolerx99 2-240GTX with Heatkiller-4-Pro/ vrm water block Both&x299 2-280GTX 2-D5's before and after rads
    Case2- Corsair 450D with second floors for 240GTX & 280GTX rads enclosed and filtered on top
    Power SupplyEVGA 1000P2 & EVGA 1200P2
    Keyboard Logitech G910 Orion Spectrum & Logitech G710+
    Mouse 2-Red dragon Perdition
    OS Win-7 & win-10 pro on both systems Win-7 everyday os
    Accessory #1 Heatkiller IV Pro plexi/ Copper base on both systems
    Accessory #2 Mayhems Biocide and Inhibitor with distilled water
    Accessory #3 Mayhems 3/8-5/8" clear soft tubing
    ThrashZone's Avatar
    Join Date
    Oct 2017
    Reputation
    13
    Posts
    278

    Hi,
    From what you posted and what I wrote before
    Your system agent is high well over 1.2v where 1.15v is a better max
    vccio cpu is a little low at 1.12v where 1.15 is a better max although as stated 1.2v will be produced on auto.

    You might also see what vccin/ input voltage is doing and keep it maxed at 1.95v
    If still wonky try digi settings and switch to LLC-4 or 5

    Voltage reading software using hwinfo

    https://www.hwinfo.com/download.php

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •