Results 1 to 5 of 5
  1. #1
    New ROGer Array NordLicht PC Specs
    NordLicht PC Specs
    MotherboardAsus ROG Zenith Extreme Alpha Rev 1.0
    ProcessorAMD Ryzen Threadripper 2970 WX
    Memory (part number)64GB Corsair 4 Pack
    Graphics Card #1Gigabyte RTX 2080 8G Waterforced
    Sound CardBoard
    MonitorSamsung C49HG9x 3840x1080
    Storage #1Samsung NVMe SSD Pro 970
    Storage #2Samsung NVMe SSD Evo Plus 970
    CPU CoolerRyuijn 360 Aio
    CaseROG Helios
    Power SupplyAsus Thor 1200P
    Keyboard Sharkoon PureWriter RGB
    Mouse DECUS Gaming Mouse
    Headset Corsair Void Pro
    Mouse Pad Roccat SOTA
    Headset/Speakers Logitech
    OS Windows 10
    NordLicht's Avatar
    Join Date
    Aug 2019
    Reputation
    10
    Posts
    7

    Angry Code 00 after cold start of a Zenith Extreme Alpha --> SOLUTION

    Hello,

    my board has sometimes code 00 issues. That means after power switch on the display only shows CPU 00, then after some seconds the machine turns off automatically and on again with CPU 00 code again and stay there. Fans are turning meanwhile.

    I've tried power cycles with power cord off and on. Retry button, reflashing bios via USB, Clear cmos button. Nothing helps.

    SOLUTION
    The only thing which helps is to power off the machine, disconnect power cord and REMOVE CMOS BATTERY AND WAIT FOR 1 MINUTE.
    Then reinstall it and connect powr cord and start.

    Then you have to reload the hopefully saved bios profile. THAT'S it. Strange.

    I don't know when it will happen. Sometimes.

    Has anyone similar experiences?

    CONFIG:
    Zenith Extreme Alpha Rev 1.0
    CPU 2970WX running stock
    RAM Corsair 4* 16GB (3466 Mhz RAM) running at 2666MHz (a waste)
    PSU: ROG THOR 1200W
    Cooling: AIO RYUIJN 360
    BIOS: 2001 / or 1901 (there it will happen also)
    Last edited by NordLicht; 08-15-2019 at 05:11 AM.

  2. #2
    ROG Junior Member Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    2

    Same problem here. Seems about every 10 or so power on cycles I get hit with the code 00 and have to pull the battery.
    Are you using the fan extension card by chance? I am currently but I can't stand the AI Suite software so I purchased the aquaero 6 XT. Have not hooked it up yet though.
    I wonder if it could have anything to do with that fan extension card?

    I'm running a 2950 and using G.SKILL Trident Z RGB (For AMD) 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 3200.

  3. #3
    ROG Enthusiast Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    51

    same problem here!! I did everything.. remount CPU/RAM etc..

    It stooped doing it now.. but it was real pain in the ass at the start it was happening all the time.
    Not sure if that is because of driver updates or something, but it did not get this issue since a month now.

    I did not update BIOS.

    i'm using fan extension card all the time.

    This should be PINED and bummped regular. It's scary that 600 bucks board does this ****.
    Last edited by macmus; 09-05-2019 at 03:49 PM.

  4. #4
    ROG Junior Member Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    2

    Just thought I would throw this out here to see if anyone has had a similar experience.

    I did a fresh reinstall of Windows in an attempt to resolve an issue with my VR. This time I did not install ANY Asus software other than drivers. I have not had the code 00 issue since the fresh reinstall almost 2 weeks ago.
    This really makes me think the code 00 issue is related to some piece of Asus’ software.

  5. #5
    New ROGer Array maveri PC Specs
    maveri PC Specs
    MotherboardAsus Zenith Extreme Alpha
    ProcessorAMD Ryzen Threadripper 2950X 16-Core Processor
    Memory (part number)128GB 8 x 16GB CMT64GX4M4C3000C15
    Graphics Card #1NVIDIA GeForce RTX 2080 Ti
    Storage #1Samsung SSD 970 EVO Plus 2TB
    Storage #2Samsung SSD 970 EVO Plus 2TB
    CPU CoolerCorsair 100i AIO
    CaseCorsair 1000D
    Power SupplyCorsair AX1600i
    Keyboard Ducky Shine 2
    OS Windows 10 Professional
    Network RouterUbiquiti gear + Asus RT-AC68U

    Join Date
    Aug 2019
    Reputation
    10
    Posts
    11

    This is probably not related but in case it is or even partially related I'll post

    I was having issues with my Windows 10 pro build on Zenith Extreme Alpha

    The cpu code is different however, but I would get a freeze every 3rd or 4th boot, sometimes more

    I discovered Windows was crashing but the event was buried in the event log

    I debugged the memory dump and found a hardware error - except it's not really a hardware error but a signal error being sent to a device to reset when it is not yet active

    It turns out that windows fast start feature stores a snapshot of your driver setting on shutdown and tries to be smart on start-up. But the PC is too quick and windows is trying to reset the hardware before it's ready

    I disabled the windows fast start and al boot issues have stopped

    I doubt this is the issue here but just in case it could somehow be 'related' I thought I'd post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •