08-15-2019 04:23 PM - last edited on 03-06-2024 07:50 PM by ROGBot
08-15-2019 07:39 PM
08-15-2019 08:09 PM
08-16-2019 03:43 PM
08-16-2019 08:10 PM
08-18-2019 12:18 PM
08-20-2019 05:02 PM
08-20-2019 09:35 PM
Rayken8 wrote:
I'm experiencing some issues with this new bios (2606). I have a ryzen 3600 on a c7h and when I try to overclock the ram (G.SKILL Trident Z RGB 16GB (2x8GB) DDR4-3200MHz CL16) to 3200mhz (default value is 2133mhz) it reboots the computer twice when I restart and when I turn it on it always cold boots twice too...I hear a click sound when this happens coming from the mobo and it shuts off and then comes back to life again, so I'm kinda worried it may cause any damage to the cpu or mobo. I don't know why this issue is happening but it made me go back on the previous version (2501) where I can overclock ram through bios without any proiblem. If someone has a similar issue or knows how to fix this I would appreciate.
08-20-2019 11:36 PM
Rayken8 wrote:
I'm experiencing some issues with this new bios (2606). I have a ryzen 3600 on a c7h and when I try to overclock the ram (G.SKILL Trident Z RGB 16GB (2x8GB) DDR4-3200MHz CL16) to 3200mhz (default value is 2133mhz) it reboots the computer twice when I restart and when I turn it on it always cold boots twice too...I hear a click sound when this happens coming from the mobo and it shuts off and then comes back to life again, so I'm kinda worried it may cause any damage to the cpu or mobo. I don't know why this issue is happening but it made me go back on the previous version (2501) where I can overclock ram through bios without any proiblem. If someone has a similar issue or knows how to fix this I would appreciate.Othello wrote:
What you are experiencing is normal for this UEFI version. It does it for everyone. If it posts and boots into windows than you are fine. This issue has been talked about in another thread on this forum as well as on the OCN. Also, make sure you are setting your memory boot voltage to 1.4 to 1.45.