Results 1 to 4 of 4
  1. #1
    New ROGer Array
    Join Date
    Aug 2019
    Reputation
    10
    Posts
    20

    3700x and Asus Rog Strix X570E CPU always seems boosted?+

    I have the Asus Rog Strix x570e motherboard with the 3700x (stock Wraith Prism cooler), 16GB Corsiar Vengence RGB Pro DDR4-3000, an Intel and HP M.2 SSD, and a Gigabyte RTX 2070 Super Gaming OC graphics card. All running by a Corsair RM750i PSU. Running Windows 10 Pro.



    When I start up the computer and it's at idle on the desktop, running either the Ryzen Master program, CAM software, or CPU ID - it shows my clock speeds are at 4200-4400. I haven't boosted anything in the BIOS or Ryzen Master, everything is default setting. The Windows Power Plan is set to AMD Balanced. I've downloaded all the latest BIOS, Chipset, etc. drivers. Basically everything is current, vanilla stock, no mods.



    Why is the CPU running at what seems to be the boost speed, even at idle (CPU indicator shows < 10% load). If I change the Power Plan setting to 99% for the Maximum Processor State, immediately the CPU speed drops back down to ~3600 mhz and the temps drop to the mid 40s Celsius (from the low 50s).



    What's going on here?
    Miniatura de Adjuntos Miniatura de Adjuntos Capture.jpg  

    Capture2.jpg  


  2. #2
    New ROGer Array
    Join Date
    Aug 2019
    Reputation
    19
    Posts
    20

    also have a X570 strix-E but with a 3900X and it's doing the exact same thing, slapped a power meter in the power outlet as i noticed my psu fan running wile idling on the desktop (i had just stopped playing a game so i guess it was still cooling itself) it's drawing a cool 125w sitting on the desktop. now i've got a rgb keyboard/mouse and 4 rgb fans in my case...and i guess the amd boxed fan is rgb but...what?!?!?!?!

    i've also seen the linus gang using a asus board with a 3900x and it sitting at 0.3v, even with corsair icue off my cpu sits at 1.39-1.45v (even when i had a bare fresh windows it never dropped below 1.1v).

    i've done multiple battles with the bios but cannot figure out how to get it to behave, disabling core boost caps it to a permanent 1.1-1.18v and 3.8ghz max which isn't ideal but about as much as i've achieved, running latest bios/chipset driver but made 0 difference with the old stuff as far as i can tell (maybe better boost, don't really know/care not running in to problems just high idle power draw/temps/voltage.



    set ryzen master to exclude voltage control (no real difference) also find the 1.45v in the bios ...troubling, why would it need to boost in bios? it fits in the L3 cache twice i cannot immagine any operation in it requiring or benefitting from the cpu going full blast

    at the same time if i run asus 5 way optimization it starts at 4.0 all core (instead of 3.8) and it does it at 1.1v so...whats up with that 1.45v for 3800 now amd said that up to 1.5v is not a problem for zen 2 but....isn't it when it's 24/7 seemingly without reason?
    Last edited by anub1s21; 08-17-2019 at 03:45 PM.

  3. #3
    ROG Junior Member Array
    Join Date
    Sep 2017
    Reputation
    10
    Posts
    1

    I have the exact same setup as you litterally and i am facing the same issues as you. When checking HWmonitor i see that i am almost always boosting which i wouldn't mind during gaming but not while doing simple web browsing.
    I don't know where i should fiddle or what to do :/ Did you manage to get your temps down ?


    Quote Originally Posted by djxpress View Post
    I have the Asus Rog Strix x570e motherboard with the 3700x (stock Wraith Prism cooler), 16GB Corsiar Vengence RGB Pro DDR4-3000, an Intel and HP M.2 SSD, and a Gigabyte RTX 2070 Super Gaming OC graphics card. All running by a Corsair RM750i PSU. Running Windows 10 Pro.



    When I start up the computer and it's at idle on the desktop, running either the Ryzen Master program, CAM software, or CPU ID - it shows my clock speeds are at 4200-4400. I haven't boosted anything in the BIOS or Ryzen Master, everything is default setting. The Windows Power Plan is set to AMD Balanced. I've downloaded all the latest BIOS, Chipset, etc. drivers. Basically everything is current, vanilla stock, no mods.



    Why is the CPU running at what seems to be the boost speed, even at idle (CPU indicator shows < 10% load). If I change the Power Plan setting to 99% for the Maximum Processor State, immediately the CPU speed drops back down to ~3600 mhz and the temps drop to the mid 40s Celsius (from the low 50s).



    What's going on here?

  4. #4
    ROG Enthusiast Array Fredy M PC Specs
    Fredy M PC Specs
    MotherboardASUS Strix B350 F Gaming
    ProcessorRyzen 5 1600x
    Memory (part number)CMK8GX4M2B3000C15
    Graphics Card #1ASUS Strix GTX 1080 A8G
    MonitorAOC 22" IPS Panel
    Storage #1Samsung 970 Evo Plus 250GB
    Storage #2Samsung 860 Evo 1TB
    CPU CoolerNoctua NH-D14
    CaseCorsair 230T Orange
    Power SupplySuperflower Leadex II Gold 650W
    OS Windows 10 Pro
    Fredy M's Avatar
    Join Date
    Sep 2017
    Reputation
    22
    Posts
    59

    In bios enable (don`t let it on auto) c-states in amd cbs menu...this fixed the issue with my 1600x not boosting anymore after latest 1004b update on B350 Strix...maybe it will help you guys too

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •