Crosshair VI Wifi, fan control / sensors are broken

[Jackwolfskinner]

Gonna try out the 0002 bios to see if it works. I have only seen the fan problem recently as I attached 3 fans to the motherboard directly for looks. Previous I had no fans actually connected to the C7H WiFi but since I have added these 3 fans...I have one that will shut off then turn on and back and forth and the RGB goes off and stays off.

This has been a non issue for me since I use a seperate fan controller and really is a non issue now as these are decorative fans. Anyhow I will test it out for a few days...and then mod the bios and upload it for you to look at with the features and fan control we should have that is already present. Which board do you work with mostly keep in mind the modded bios only show these options for ryzen series 1000/2000 cpus. I have not yet figured out how to unhide them for 3000. But the point is I am wanting to show you the features everyone wants that already exist in the bios. Also the fan controls that are hidden can prevent most of the fan stopping issues as well.

The most requested features are HPET, Spread Spectrum contol options to be able to enable or disable. And then the extra fan controls. The rest of the things I unhide and make usable are not ever really mentioned on OCN or reddit. Also this is a big request for the Ryzen 3000 series users as well.

And a big shout out and THANKS YOU for reaching out to us. Since you stepped up to the plate you are making a world of difference. I am getting ready to buy my a x570 board and was not gonna use ASUS again with the departure of Elmor and the lack of communication, now I am again considering ASUS for 10+ years in a row. This is due to your presence. I know I am only one user but many others felt this way as well based on comments at OCN. I have had many MBs from y'all over more then 10 years.

Me too Asus top brass should be made aware that we customers love to have someone like Elmor and Shamino working on best Forums/reddit giving out suport and info.

[Fearnor]

Anyone using the 0002 Beta UEFI and not experiencing the fan issue anymore?
I installed it this morning on C7H Wi-Fi and I'll be testing.

[weare]

Anyone using the 0002 Beta UEFI and not experiencing the fan issue anymore?

43 hours of uptime, everything's great so far.

[gupsterg]

Resume from sleep sends fan header PWM loopy on stock CPU/RAM.

On stock CPU/OC RAM I see also FCLK/UCLK become not 1:1 with MEMCLK.

R5 3600
C7HWIFI UEFI 0002
F4-3200C14Q-32GVK

Fan headers in use:-

CHA_FAN2 4 in 1 cable provides PWM, molex powered, 3x Arctic Cooling P12 PWM
CHA_FAN3 Arctic Cooling F12 PWM
HAMP EK DDC 3.2 PWM pump molex powered

UEFI settings txt in ZIP below:-

0002_setting.zip

Note: SOC/CLDO_VDDP/CLDO_VDDG set by AMD Overclocking Menu, 1056mV/925mV/969mV

HWINFO opened prior to sleep, grabbed screenie and closed HWINFO, after resume waited ~90 sec, opened HWINFO and EVT to grab screenie.

[Ryo_z]

i am experience some strange issue with 0002 (C6H), the PC cannot restart or boot after shutdown, the POST will fail and give 3 beep code (F9, related to memory?).

steps to reproduce:
1. power on the PC (cold boot)
2. after load into windows, shutdown/restart
3. power on the pc again (warm boot)
4. POST fail, F9 3 beep code

My CPU is in stock settings and only memory is OC (pass 1000% HCI memtest and stable in all previous version of bios).

[YOLO!!!]

after 21 hours of uptime my fan still working, fingers crossed
remain the issue at boot that my RTX 2080 fans goes to 100% for few seconds

[Shamino]

i am experience some strange issue with 0002 (C6H), the PC cannot restart or boot after shutdown, the POST will fail and give 3 beep code (F9, related to memory?).

steps to reproduce:
1. power on the PC (cold boot)
2. after load into windows, shutdown/restart
3. power on the pc again (warm boot)
4. POST fail, F9 3 beep code

My CPU is in stock settings and only memory is OC (pass 1000% HCI memtest and stable in all previous version of bios).

yes f9 is dram related
just checking if it actually boots with the right dram voltage, set both dram vboot voltage (under digi vrm) and dram voltage to whatever is needed / used.

[Ryo_z]

yes f9 is dram related
just checking if it actually boots with the right dram voltage, set both dram vboot voltage (under digi vrm) and dram voltage to whatever is needed / used.

no, the issue is still occur even i manually set the correct dram and dram boot voltage.

fyi, this issue also present in bios 7403/7401, but not on version 7302.

[Richard_Dower]

after 21 hours of uptime my fan still working, fingers crossed
remain the issue at boot that my RTX 2080 fans goes to 100% for few seconds

The RTX 2080 fan issue you noted, also on my setup. See the recent videos I posted to visually see if yours is similar to mine.

[Richard_Dower]

no, the issue is still occur even i manually set the correct dram and dram boot voltage.

fyi, this issue also present in bios 7403/7401, but not on version 7302.

Can I bet that 7302 is a pre ryzen 3000 bios ?