ROG Rampage VI Extreme Encore

[tistou77]

@Biozz

Thanks for the informations
With the R6E and since bios 2004, this double boot isn't present

Maybe with the Encore and the next bios

[Desertum_0]

@Biozz

Thanks for the informations
With the R6E and since bios 2004, this double boot isn't present

Maybe with the Encore and the next bios

@Tistou77,

Is it safe to use your modded latest bios 0603 into the Rampage Encore?
The more I read about this board the more worried I become.

Can anyone explain what is the issue with the double boot?

Thanks a lot

[Desertum_0]

The bios for the omega has not been updated since Version 3006
2020/02/14... It is due for an update a long time ago.

As per the Encore,usually Asus will provide a bios update every 3 months,it is also past due.

Pick up your act Asus.

[tistou77]

@Tistou77,

Is it safe to use your modded latest bios 0603 into the Rampage Encore?

Yes it's safe

[cisco0623]

Yes it's safe

New Bios today, no mention of double boot.

ROG RAMPAGE VI EXTREME ENCORE BIOS 0702
"1. Update ME FW version.
2. Improved system stability
3. Update Microcode for IPU 2020.1

[tistou77]

I installed it and still this double boot
And also, always the problem with the voltage of the rams

[BigJohnny]

I know I’m dragging up the dead but I’ve not experienced a double boot with a 9940X or 10980XE.*

[francoistoen]

Hi

I'm using rampage 6 extreme encore, core i9-10900x, 32 Go RAM, SAMSUNG 970 EVO PLUS system disk.
Using samsung NVME driver ver 3.3.0.2003.
I noticed a big loss in random read performance (see belowpicture).
The only change done is the windows 10 20H2 update.
The same loss appears on all my SSD drives (RAID, SATA or nvme)

Have you an idea of what is the problem and how to solve it?

Thanks for help.
Francois

[Desertum_0]

Hi

I'm using rampage 6 extreme encore, core i9-10900x, 32 Go RAM, SAMSUNG 970 EVO PLUS system disk.
Using samsung NVME driver ver 3.3.0.2003.
I noticed a big loss in random read performance (see belowpicture).
The only change done is the windows 10 20H2 update.
The same loss appears on all my SSD drives (RAID, SATA or nvme)

Have you an idea of what is the problem and how to solve it?

Thanks for help.
Francois

I use the same SSD as you do however because I also use Intel RST (Optane HDD Acceleration) the Intel RST has taken over my main OS SSD disk and I am unable to find my disk using Samsung magician however in your case I would recommend to update the firmware (if any available) .

Also, does it show that is using the Samsung driver and that is connected at PCIe 4X?

Let us know.

[francoistoen]

Hi
Thanks for your reply and suggestions

I use the same SSD as you do however because I also use Intel RST (Optane HDD Acceleration) the Intel RST has taken over my main OS SSD disk and I am unable to find my disk using Samsung magician however in your case I would recommend to update the firmware (if any available) .

The firmware and software are both up to date.

"Also, does it show that is using the Samsung driver and that is connected at PCIe 4X?"

Samsung driver is used and the connection is PCIe3x4. See picture below

Let us know.

Francois