ASUS today launched the Republic of Gamers (ROG) Rampage VI Extreme Encore socket LGA2066 motherboard. This board replaces the original ROG Rampage VI Extreme from the product-stack, but is positioned a notch below the Extreme Omega. It still has a beefy EATX PCB, but with slight variations to the layout. A few features such as the U.2 port are removed, while some of the connectivity options receive major updates. To begin with, the Extreme Encore features Wi-Fi 6 (802.11ax) WLAN (the Extreme Omega has the older 802.11ac standard). The Extreme Encore also features a 20 Gbps USB 3.2 Gen 2x2 port, which combines 10 Gbps wiring from two ports to a single port. The wired networking is unchanged, with a 10 GbE interface driven by an Aquantia controller, and a 1 GbE driven by an Intel i219-V.
ASUS also reworked the CPU VRM compared to the original Rampage VI Extreme. The new Extreme Encore features a 16-phase CPU VRM with Infineon TDA21472 power-stages, and a large fan-heatsink with more surface-area than even the heatsink featured on the Extreme Omega. The memory VRM is a 4-phase (2+2 phase) setup. The expansion slot area has been made a little more usable, with x16, space, x4, x16, space x16, compared to the x16, double-space, x16, x4, x16 layout of the Extreme Omega. The Extreme Encore features the latest ROG design scheme, with even more acrylic aRGB diffusers. The rest of the board's feature-set is identical to that of the Extreme Omega. The ROG Rampage VI Extreme Encore is expected to be priced at USD $649.99.
Source