Building my render/gaming rig. - Advices needed

[ColonelS]

So all is well? Anymore issue that we can provide? Sorry >< was busy cleaning up the forums and just saw your pm.

[_]

Yea that CPU fan speed is crazy! Can you use Fan Xpert to lower the speed? Or, go into the BIOS and set the profile to 'silent'

[Tenshi]

So all is well? Anymore issue that we can provide? Sorry >< was busy cleaning up the forums and just saw your pm.

Yes i have a few questions, thanks for being here helping.
1. There's a way i could save all the info that the bios provide me, so i can upload here and you guys tell me what it's wrong and need to fix it, i think some numbers are wrong, as well some settings. Or there's a way to put them at default.

Yea that CPU fan speed is crazy! Can you use Fan Xpert to lower the speed? Or, go into the BIOS and set the profile to 'silent'

Yes please tell me where i can download Fan Expert, and i'll try now the bios option.

Update: where's the "Silent" option, or where i can set that, i was looking the Fan Control Options there and nothing..
I download the Asus Fan Expert, and it says that it doesn't support the board. ._. . So what i do?

Update2: Ok, i did it, i used the silent setting,everything is

Btw i update the Bios to the last one 1301.
(thanks for soon reply)

[DarthBeavis]

It depends on your CPU cooler, For your cooler those temps are okay. I normally use a more robust cooling solution

[Tenshi]

It depends on your CPU cooler, For your cooler those temps are okay. I normally use a more robust cooling solution

Yes i plan to use the best corsair i could find, it's a list of other stuff i need to buy in a few months(I'll post here so you can guide me too =D), i don't plan to stick with the stock coolers, neither for the gpu and the cpu, but for now i want everything almost stable, to work in some 3D stuff.

This are my new temps(can i make the images smaller? or put only the direct links, don't want to kill people eyes with so much red)




I really want to make some stressfull test, for the Ram, cpu and Gpu. Can you recommend me a good software for that? So after that i upload the data and you see if there's a problem. Maybe voltages with ram/cpu, or the gpu.
(hate to bother people, but i'm learning...thanks in adv)

[Tenshi]

Guys Hello Again!
Please can someone check out my CPU-ID Report? I think a lot of data are wrong. I added as attachment.
The memory frequency and timing i think it's wrong. Can someone help me?

[HiVizMan]

I am not sure what you mean about things being wrong. Your CPU is at 3.9GHz so not sure what more you want from that setting.

[Tenshi]

I am not sure what you mean about things being wrong. Your CPU is at 3.9GHz so not sure what more you want from that setting.

HiVizMan!!! Thanks for the input; but i didn't know that. Have a few more questions:

-1)Ram are ok? I mean do i need to put those corsair at 1600 or 1333 as the QVL says?
-2)About Dram command rate. 1T or 2T?
-3)Heat is ok in general? There's a way to see the heat from the Ram?
-4) In my last computer, the lan cable on the back of the case always were "green", but now its "orange", that's ok? I was looking in the manual but i didn't find anything related.

[HiVizMan]

LOL

Your system is peachy just relax and enjoy it.

[chrsplmr]

Tenshi ... Congrats ... This is an awesome thread .. you and those that have helped have
left no ROG unturned ... every conceivable angle has been disected ... accept it ... that thing ROGz.
And HiViz said it best ..
It is indeed peachy ... enjoy it ... Let the ROG Begin.c.