cancel
Showing results for 
Search instead for 
Did you mean: 

ROG Armoury II V3.00.30 and ROG Spatha

Gushy
Level 7
Hello,
My ROG Spatha does not work anymore. Wireless nor with cable.
Brand new Windows 10 PRO Every driver download and install clean.
ROG Armoury II V3.00.30 just moving those red dots in middle and does not detect the recevier or mouse device.
I see Rog Recevier in windows deviced and ROG Spartha in drivers. But they just do not work.
Here some photos.
Btw my motherboard is Asus Rampage VI Extreme if that counts.
8170881709
https://gyazo.com/eb4b4f97a425ed813cf6a9d9b7e6fda481707
That is a .gif variant.
Does someone have solution ?
4,783 Views
10 REPLIES 10

MrAgapiGC
Level 13
mmm interesting. Using the cable....and the app open. press the left center and righr at the same time and plug the cable on the mouse. But you have to have the 3 press when the cable is incerted.

These will restart the mouse and reinstall the firmware.

ODD the drivers is in

Tell me more about the computer nothing specific.
Learn, Play Enjoy!

Gushy
Level 7
Gushy wrote:
Hello,
My ROG Spatha does not work anymore. Wireless nor with cable.
Brand new Windows 10 PRO Every driver download and install clean.
ROG Armoury II V3.00.30 just moving those red dots in middle and does not detect the recevier or mouse device.
I see Rog Recevier in windows deviced and ROG Spartha in drivers. But they just do not work.
Here some photos.
Btw my motherboard is Asus Rampage VI Extreme if that counts.
8170881709
https://gyazo.com/eb4b4f97a425ed813cf6a9d9b7e6fda481707
That is a .gif variant.
Does someone have solution ?


Noting work.
When i plug the cable windows does not recognize the mouse.
And i try to understand how to restart the mouse and reload the firmware but no luck.
Is there a pichtures where i can see ?
The mouse was working fine 2 days ago and last night i start the pc and mouse its just stop working.
Any idea please ?

Gushy wrote:
Noting work.
When i plug the cable windows does not recognize the mouse.
And i try to understand how to restart the mouse and reload the firmware but no luck.
Is there a pichtures where i can see ?
The mouse was working fine 2 days ago and last night i start the pc and mouse its just stop working.
Any idea please ?


Let me ask

The spatha comes with 2 cables. can you test these and other port? Just to discard the cable.

I will ask. But You can use another mouse to 1. i can see that filter and receiver is on windows. connect by cable and see if appears in windows. IF that appear in windows/devices, remobe those. THE last one the filter. and restart By default. The spart works without the ROG Armory If the spatha with cable appear on windows on restart and work but does not apper on the armory let me know

In my case I have issues. 1 when i try to check version of the firmware I always have diferent version. 2. some times disconection. Buti find out, in my case, that was so CLOSE from my speakers. Then the same on WIFI proximity.....

I will ask during the day or by tomorrow my earlyyy morning
Learn, Play Enjoy!

Gushy
Level 7
81711
The Rog Fusion 300 is detected. I have Claymore Keyboard but its notr here.
Everything in my pc is ROG. Except RAM memory which is G.Skill.
Motherboard:
Asus Rampage VI Extreme
Cooler:
ROG RYUGIN 240
VGA:
Asus RX 580 8Gb 256bit.
Mouse:
Asus Spartha
Keyboard:
Asus Claymore
OS Panel II and Rof Front Base
Only OS Panel II i use right now.
Everything work except mouse right now.

Is there anything i can do please ?

Gushy
Level 7
81714
Noting works.
Change both cables i did try every USB port noting help.
Mouse even not work with cable. Windows do not see the mouse when its on cable.
Mouse just glowing green and that is it.
When try another port recevier glow 2 times purple and then stop.
I run out of options 😞

MrAgapiGC
Level 13
ok i will send these to a friend to check!

open event viewer and check if there is error that has a name with armory please
Learn, Play Enjoy!

MrAgapiGC wrote:
ok i will send these to a friend to check!

open event viewer and check if there is error that has a name with armory please


OK now. something happen.
The Aurmory show me the mouse but the dock still not blink nor mouse work. I even try change the colors no luck there aither.
Here what i see.
I set here everything Default and save.

81721
81722
81723

I found solution !
It was battery. I remove the battery clean the connectors (all of them in battery layer too) and now mouse work perfect with cable and wireless.

Gushy wrote:
OK now. something happen.
The Aurmory show me the mouse but the dock still not blink nor mouse work. I even try change the colors no luck there aither.
Here what i see.
I set here everything Default and save.

81721
81722
81723


ok thanks for the notes
Learn, Play Enjoy!