Can't boot with D.O.C.P - G.skill Trident Z RGB

[BelluX]

Hi,

i have a problemi with this rig:

CPU: Ryzen 3700X
RAM: Trident Z RGB (For AMD) DDR4-3200MHz CL16-18-18-38 1.35V
MOBO: X470 Crosshair Hero VII (BIOS: 2801 recently updated)

It starts only with the default/auto ram settings, they are installed in B2 and A2 slots

I can't use the D.O.C.P profile in any way, i don't know whats the problem.

I already tested with memtest without any errors.

G.Skill: https://www.gskill.com/product/165/1...5V32GB-(2x16GB)

[OverElfstone]

Had the same issuse with this BIOS. (Worked fine on earlier versions)
Probably an issue with the DOCP table.

I just sat the clock, voltage and timings from DCOP manually and it's working fine.
(same kit with Hynix AFR memory)

[BelluX]

(same kit with Hynix AFR memory)

how to know which chip have my ram?

[igralec84]

how to know which chip have my ram?

Use Thaiphoon Burner and read the image of a module.

http://www.softnology.biz/files/thphn160.zip

[tomcoleman]

im having a slightly same issue, on my G.Skill Neo ram, when i set DCOP PC sometimes wont even boot, on BIOS 1001 on Asus Foruma VIII X570

[Sigtran]

I would suggest to try manual parameter setting and not using DOCP, see if that helps.